Turnigy 4s 40c 5000

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Drax21
    Fast Electric Addict!
    • Jul 2011
    • 1021

    #61
    Originally posted by ENCORE MAN

    Thank you Rachel, you are the greatest. BG

    [/B]
    Congratulations Brian. Getting money back from HK is not an easy task but one I have done a few times . Love your reply to Rachel
    Everything that has a beginning, has an End

    Comment

    • ENCORE MAN
      Senior Member
      • Jan 2010
      • 891

      #62
      Originally posted by ENCORE MAN
      Haiyins arrived today, five days after ordering. They look perfect. Every single cell was at 3.84 volts........I will keep you informed BG
      I have three cycles on my new HAIYIN 5000 4S 40c. Good results in my P MONO, seem to have lots of power. No puffing whatsoever, appear perfectly square. They balance at 420 420 420 419 volts on cheap Thunder Ace 6 charger. Time will tell if they are worth buying again. TTYL BG

      Comment

      • Brushless55
        Creator
        • Oct 2008
        • 9488

        #63
        Originally posted by ENCORE MAN
        I ordered these on Sunday from the US warehouse and they arrived in Florida today. Pretty good I would say. Now for the bad. Look at the pictures, one battery is perfect and the other is puffed up 6mm right out of the box. I know better than to try and return it. I guess ther will be no P MONO running this Sunday. BG

        [ATTACH=CONFIG]67455[/ATTACH][ATTACH=CONFIG]67456[/ATTACH][ATTACH=CONFIG]67457[/ATTACH][ATTACH=CONFIG]67458[/ATTACH][ATTACH=CONFIG]67459[/ATTACH]
        Originally posted by ENCORE MAN
        Tim, here are the cell readings. BG
        The question I see is the picture shows a used battery?
        out of the box they should read 3.85v per cell... 4.2v is fully charged

        .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

        Comment

        • ENCORE MAN
          Senior Member
          • Jan 2010
          • 891

          #64
          Well Brushless, you are absolutely right. The "good battery" read 3.85, 3.89, 3.85 and 3.87 volts. This battery, shipped to me as new, had been charged, puffed up and returned to HK who then turned around and sent it to me as new. The Haiyins are working well and will be my battery of purchase in the future. BG

          Comment

          • Brushless55
            Creator
            • Oct 2008
            • 9488

            #65
            Originally posted by ENCORE MAN
            Well Brushless, you are absolutely right. The "good battery" read 3.85, 3.89, 3.85 and 3.87 volts. This battery, shipped to me as new, had been charged, puffed up and returned to HK who then turned around and sent it to me as new. . BG
            I know I'm right...
            up till now, or after I made a comment did you mention this battery to be used???
            take a look below..

            Originally posted by ENCORE MAN
            Ticket #149999: Defective TURNIGY 4S 5000 40C BATTERY

            Your request (#149999) has been received, and is being reviewed by our support staff.
            To review the status of the request and add additional comments, please visit www.HobbyKing.com


            --------------------------------------------------------------------------------

            BRIAN, Jan-07 10:25 (HKT):
            Hi, I received my Turnigy 4s 5000 40c batteries. One battery was perfect and the other is defective. The battery arrived puffed and is unusable and unsatisfactory as a new item. I have included pictures of the batteries and cell count rating. The good battery reads a perfect 4.20 4.20 4.20 4.20. The faulty battery readings are in the photograph. Please send me a replacement battery ASAP. Thanks in advance for this, Your customer looking for help, Brian Giardelli.

            Attachment(s)
            STH73070.JPG
            STH73074.JPG
            STH73077.JPG
            STH73080.JPG
            STH73079.JPG
            STH73076.JPG

            Tim, I am a fighter. This is my ticket for HK to replace it. We will see what happens. BG
            even in this email to HK you never mentioned this and also you posted your findings of a full charged good pack, not how it arrived to you at 3.85v per cell ??
            something is up...
            .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

            Comment

            Working...