Win Max Lipos Any Good?

[rcboatmanwithkids2880]

They seem to be a bit low Amp wise for what you would require hey Drax , did Leader Hobby give you a favorable discount after you told them about the test you are conducting ??

All the best mate ,
Brad
Oz

[Drax21]

They seem to be a bit low Amp wise for what you would require hey Drax , did Leader Hobby give you a favorable discount after you told them about the test you are conducting ??

All the best mate ,
Brad
Oz

Hi Brad


My Hyperion packs are 4200mah 45-90c so I thought I would go for the closest possible with the Winmax 4s 4200mah 50-100c
I will be running these packs in parallel eventually but first test will be done individually to see if they can put out that (C) rating.
Will let you know when they arrive. First thing I will check is Internal Resistance and Cell Voltages.

[rcboatmanwithkids2880]

Hi mate ,

Didn't realize they were to be the equivalent specs to your Hyperion , will be great if they match twice as expensive product ....

Brad
Oz

[Drax21]

Hi mate ,

Didn't realize they were to be the equivalent specs to your Hyperion , will be great if they match twice as expensive product ....

Brad
Oz

If the Winmax batteries perform I am thinking of becoming a vendor of them. Need some good results over time first.
The packs actually weigh more than Hyperion according to the website which is good!
I actually have never bought off leaderhobby direct before so I hope the service is good.
Anybody got any experience of buying off the website?

[rcboatmanwithkids2880]

Let me know when you become a Winmax dealer Drax , & I'll send some busniess your way . After 50-100c 5000mah 6S packs as you know. ...

All the best mate ,
Brad
Oz

[Drax21]

Let me know when you become a Winmax dealer Drax , & I'll send some busniess your way . After 50-100c 5000mah 6S packs as you know. ...

All the best mate ,
Brad
Oz

Alright Brad, Thanks for that mate. Lets see how the packs perform against Hyperion's first. So far I have had no update or anything to say whether the batts have been shipped or not. Going by the feedback on ebay, most people have got the batteries pretty quickly. Hopefully that is the same for me..

[Krusher]

-moved-

[Drax21]

I found this thread by searching on Yahoo! for WinMax Lipo batteries and thought I'd add some FYI. I ordered my 3S packs on Wednesday and they arrived here today (Friday) from Leadershobby. They are 4200mAh, 50C batteries on sale from the Miami warehouse; China would have been much longer of course. Here's the voltages I have on the 4 packs. Meter=Amprobe AM-140-A. (It's a decent, accurate portable meter if you don't have lots of $ to spend on a Fluke).

1=3.8956, 3.9156, 3.9144
2=3.8964, 3.8846, 3.9043
3=3.9134, 3.9166, 3.9144
4=3.9038, 3.9137, 3.9054
Weight (avg)=357g

Since I use 6S total, I'll be pairing up 1+2 and 3+4 most likely.

I'll post a follow-up message in the future once I get connectors on them and a few runs in late next week. I'm going from old 30C 4000's to new 50C 4200's so it should work out well (I hope).

Hi Krusher thanks for the post on this thread. Any info gathered about these batteries would be great. I actually started a new thread since the Winmax batteries arrived and compared them against Hyperion. The Winmax batts are doing well! If you could post in the other thread that would be great it's called Winmax 50-100c Lipos vs Hyperion 45-90c . Battery testing Review

here's the link http://forums.offshoreelectrics.com/...818#post413818


I'm off with my Winmax and Hyperions today. I will also be putting my results in the thread.

[Krusher]

Sorry about that; I remember seeing your 2nd post earlier now but forgot about it when I searched for "WinMax Lipo" a second time. I'll move that message now into your other posting which is newer/more relevant.