Blade CX3 Heli battery low and wont charge,

[HYDROJERRY]

i have a blade heli i got new a year ago, flew it maybe 3 or 4 times and the charger dosent have storage so i set it on a shelf for about a year, now the 2s 800mah lipo shows 1.2v and the factory charger and my Icharger wont charge it back up,, is there anything i can do to try to charge it back up,, maybe super slow,, or get enough juice in it so my charger will work on it again!!! please help i dont wanna throw it away being only used afew times..

[egneg]

I got 3 of the 3S version for my Blade CP Pro.

http://www.hobbypartz.com/98p-20c-800-2s1p.html

[HYDROJERRY]

Man that is cheap but i was hoping to bring this one back to life..

[Brushless55]

Jerry, what I've done a few times when my lipos are to low to charge is set the charger on Nimh mode and charge at 0.1mah and watch the lipo volts very close
if the pack is ok, it will come back up without issues.. when it reaches about 6v for a 2s pack I shut it off and put the charger back to lipo mode and charge the pack from there
hope that helps you....

[HYDROJERRY]

OK Brushless, thats what i was looking for, just didnt wanna buy a new one if theres a chance i can bring this one back up, its only been charged like 4 times from new!!! if this dosent work then ill look for a new one..

[Brushless55]

Right on Jerry, glade to help...
Just make sure the volts don't go past 4.2v per cell, and keep a close eye on temp... if the pack warms up at all, good chance its done..

[HYDROJERRY]

Thanks bro ill be super carefull !!!

[HYDROJERRY]

thank you brushless!!!! that worked and i was able to fly my heli that night and did a storage charge on it and seams fine now,, ill never use the cheap charger that came with the heli again!!!PS it didnt get worm or anything but its a 800mah battery and it took 758mah when it was done..

[Brushless55]

Awesome!
nothing like getting a fellow Pliot in the air