Balance Y adapters

[Flyguy55]

Does anyone make lipo Y balancing adapters ? Need to adapt 2 - 3S JST plugs into 1- 6S Hyperion plug .
I want to be able to charge 2 packs as 6S1P . I need 2 adapter cords .

Thanks , Dick

[Chilli]

I think this is what you need. Hyperion makes a two 3S to 6S Y adapter for both XH and XP battery taps.

http://www.rcdude.com/servlet/the-1611/Hyperion-Balance-Y-dsh-adapter--dsh-/Detail

[Flyguy55]

Thanks , close , but I don't think either of those listed will work. Both 3S plugs are HP . I need 3S JST plugs.

Dick

[Chilli]

Been there!! I had to make my own to charge two 2S packs as a 4s.

What brand packs and charger are you using???

[egneg]

That will work with converters from RC Lipos.

http://www.rclipos.com/Accessories.htm#PQALAdapters

[Flyguy55]

Hyperion Duo Charger . The T NanoTec 3S lipos came with JST plugs . My 4S T NanoTec 's all came with Hyperion plugs . Its what I expected this time.

I emailed RC Lipos , He suggested Mike at Cheap Battery Packs . I'm waiting for a response from Mike

Yes , I can make my own, I made some for charging 2 - 4S packs as 8S. Then I had lots of left over connectors. If I have to order connectors anyway I'll try to get the Ys already made up.

I'm setting up an AC Pro Sp 40 hull I never got around to building when I raced Nitro many yrs ago . NEU 1527 1Y , 180 HV ESC . 6S 2P 4000 T NanoTec Lipos .

[lenny]

try for plugs http://www.helidirect.com/index.php

[Flyguy55]

Cheap battery packs was no help. Pat at RC lipos came up with an off the shelf simple solution. Thanks Pat