Bullet connector covers

[hyrulejedi86]

I found something useful and I wanted to share this with everyone. I was suggested by another member to get rubber caps for the end of my soon to be soldered on bullet connectors. I went looking for these at the store and found something almost the same as automotive caps but cheaper!

I went to the shelving section at lowes and they had white rubber end caps by rubbermaid for $5 that were almost exactly the same as the auto one's but not as long. It was a 100 variety pack. The mediums which fit the male 6mm bullets perfectly and the larges fit the 6mm female.

Like these but in a variety pack:

http://www.homedepot.com/h_d1/N-5yc1v/R-100117966/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053

[FRED]

connectors

Water line hose for boats. Just cut a piece off, tad longer than connector.

[hyrulejedi86]

Well there's that too!

[Diesel6401]

I found something useful and I wanted to share this with everyone. I was suggested by another member to get rubber caps for the end of my soon to be soldered on bullet connectors. I went looking for these at the store and found something almost the same as automotive caps but cheaper!

I went to the shelving section at lowes and they had white rubber end caps by rubbermaid for $5 that were almost exactly the same as the auto one's but not as long. It was a 100 variety pack. The mediums which fit the male 6mm bullets perfectly and the larges fit the 6mm female.

Like these but in a variety pack:

http://www.homedepot.com/h_d1/N-5yc1v/R-100117966/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053

This is the same thing I use lol....