Y connector for parallel

[dasboata]

I was woundering if they make any Y connectors for building a harness to run parallel cells are you guy just twisting the wires together thanks Chris

[Jeff Wohlt]

They have them with deans but i would not use them. Build some out of bullet style. I have asked to make some for 5.5mm but have not gotten to them yet...figured ose would probably have some made as there was a post on it.

[dasboata]

They have them with deans but i would not use them. Build some out of bullet style. I have asked to make some for 5.5mm but have not gotten to them yet...figured ose would probably have some made as there was a post on it.

I saw the deans You are correct I want them for 5.5 bullet thanks Chris

[HOTWATER]

Here you go Chris...

---> http://forums.offshoreelectrics.com/...light=parallel

-Kent

[Diesel6401]

Yup make them out of bullets. Mine look like a "T"

The first pic are mine, the second another members. I don't have any pics of mine not installed but same concept just different letter lol. I also used F4 tape instead of heat shrink which is why mine are orange.

[carlcisneros]

Diesel:

F4 tape? GAWD, does that bring back memories!!!!!!!!!!!!!

Carl (INS/DOPPLER/FLR/MADAR, ect.)

[dasboata]

silver solder

my 1st try making a Y I used Mapp gas and silver solder pretty sure the gold plating is gone I bonded it together with #12 wire then soldered it I might do it again with some lower melt silver solder what do you guys thing use it or make another 1 thanks chris