Turnigy batteries - quality problems

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sailr
    Fast Electric Addict!
    • Nov 2007
    • 6927

    #31
    Remember, the Hyperions are already the "Nano" technology. They have been out for several months and proven to be outstanding batteries. Best part is they are warranted right here in the USA!

    We are a hyperion dealer. We offer a discount to OSE members. You need to PM me for a quote. The packs are NOT on our website.
    Mini Cat Racing USA
    www.minicatracingusa.com

    Comment

    • Chilli
      Fast Electric Addict!
      • Jan 2008
      • 3070

      #32
      PM sent Jim.
      Mike Chirillo
      www.capitolrcmodelboats.com

      Comment

      • Ronbo
        Senior Member
        • Jul 2010
        • 121

        #33
        Well, I got my packs today from HK. Turnigy 4500 and 5000 2s1p. 3 of the 4 packs the balancer reads both cells, but one 5000 only reads 1 cell. put on charger and thankfully it reads 2s1p, but voltage was around 5.6 or so. it quickly came up even on 1C. May need to watch this pack. Im bringing it up to 7.7 to match the other, then charge them both at same time. I think Ill deal with the website that has them in the US after reading the horror stories. fwiw
        Ron
        1/10th 2014 U-6 Oberto ,1999 U-6 Miss Madison, 1971 U-6 Miss Madison, 1976 U-6 Miss Madison Unlimited Hydros

        Comment

        • egneg
          Fast Electric Addict!
          • Feb 2008
          • 4670

          #34
          I have a 4S/5000 pack that always had balance problems but the voltages have always been good. I have used it hard (racing) all season with no problems.
          IMPBA 20481S D-12

          Comment

          • ms71171
            Senior Member
            • Jul 2010
            • 119

            #35
            Add me to the list. Just got 2 3S 5000Mah 25C Turnigy packs and right in the middle of the first run with them, boat goes dead. Put it on the charger and during battery check says "Connection Broken".

            I got a return authorization and since I bought them in the US warehouse, I hope, but doubt I'll be able to return them state side.

            I'm done with Turnigy as well.
            32" Toysport Triton, stepped hull, no flood chamber, 1515 1.5y NEU 1500kv motor, 180a Turnigy SC - running 6S, Aquacraft SV27 - currently running UL1 motor on 4S. Boat has seen 59mph running Feigao 11XL on 6S, 17" Velocity Minicat

            Comment

            • LiPo Power
              DJI Drone Advanced Pilot
              • May 2009
              • 3186

              #36
              Try with no balancer and low voltage as NmH for few minutes and when the voltage will get up a little just put it back for regular LiPo charging with balancer....
              It should fix the problem.... Make sure to monitor....








              Originally posted by ms71171
              Add me to the list. Just got 2 3S 5000Mah 25C Turnigy packs and right in the middle of the first run with them, boat goes dead. Put it on the charger and during battery check says "Connection Broken".

              I got a return authorization and since I bought them in the US warehouse, I hope, but doubt I'll be able to return them state side.

              I'm done with Turnigy as well.
              DJI Drone Advanced Pilot
              Canada

              Comment

              • Brushless55
                Creator
                • Oct 2008
                • 9488

                #37
                Originally posted by ms71171
                Add me to the list. Just got 2 3S 5000Mah 25C Turnigy packs and right in the middle of the first run with them, boat goes dead. Put it on the charger and during battery check says "Connection Broken".

                I got a return authorization and since I bought them in the US warehouse, I hope, but doubt I'll be able to return them state side.

                I'm done with Turnigy as well.
                I've bought about 20 packs from HC and I did have one out of the group that went dead like yours in my brushless Revo.. come to find out it was a tap that the solder joint was bad.. I spent about 2min for fix the pack, and now it works great
                real easy fix
                .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

                Comment

                • Ronbo
                  Senior Member
                  • Jul 2010
                  • 121

                  #38
                  After I charged the pack some, I was waterproofing and setting up the boat. I tried to see which one didnt read on the blinky. Well, now its registering on the blinky. wiggled wires and still fine. Ill still be monitoring these packs tho..
                  Ron
                  1/10th 2014 U-6 Oberto ,1999 U-6 Miss Madison, 1971 U-6 Miss Madison, 1976 U-6 Miss Madison Unlimited Hydros

                  Comment

                  • ms71171
                    Senior Member
                    • Jul 2010
                    • 119

                    #39
                    Originally posted by Brushless55
                    I've bought about 20 packs from HC and I did have one out of the group that went dead like yours in my brushless Revo.. come to find out it was a tap that the solder joint was bad.. I spent about 2min for fix the pack, and now it works great
                    real easy fix
                    So you cut open the pack?
                    32" Toysport Triton, stepped hull, no flood chamber, 1515 1.5y NEU 1500kv motor, 180a Turnigy SC - running 6S, Aquacraft SV27 - currently running UL1 motor on 4S. Boat has seen 59mph running Feigao 11XL on 6S, 17" Velocity Minicat

                    Comment

                    • gartman
                      Member
                      • Aug 2010
                      • 31

                      #40
                      lipo batt.

                      My 1000 mAh 3c 11.1v 25c lipo batt. in my 26" Boat swells up after a run. I'm running a Fiego 7L 3511kv motor with a Caste Creations Hydra 120 esc . I'm new with RC Boats Please

                      Comment

                      • johnf
                        Fast Electric Addict!
                        • Dec 2009
                        • 1078

                        #41
                        1000 mah? Sounds like the problem lol
                        Catching Air!

                        Comment

                        • Brushless55
                          Creator
                          • Oct 2008
                          • 9488

                          #42
                          Originally posted by gartman
                          My 1000 mAh 3c 11.1v 25c lipo batt. in my 26" Boat swells up after a run. I'm running a Fiego 7L 3511kv motor with a Caste Creations Hydra 120 esc . I'm new with RC Boats Please
                          Welcome!
                          one question, how long are you running your boat?
                          also, that's a small battery for a boat that big with that motor
                          .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

                          Comment

                          • crabstick
                            Senior Member
                            • Jul 2008
                            • 954

                            #43
                            hahaha 1000mah!

                            Lucky it hasn't caught on fire tbh. Not a quality issue with the battery in this case..

                            Is it a 540 or 380 sized motor?
                            Matt.
                            FE, Nitro and Gas racing in Auckland
                            www.rcboats.co.nz

                            Comment

                            • sailr
                              Fast Electric Addict!
                              • Nov 2007
                              • 6927

                              #44
                              I'm amazed you haven't flamed that 1000mAh lipo! That motor must be pulling WAY more than that battery can handle. Sounds to me like you should have at LEAST a 3000mAh batt in there...maybe more. 26" boat will certainly handle the size and weight.

                              How long are your runs....1 minute? ;-)
                              Mini Cat Racing USA
                              www.minicatracingusa.com

                              Comment

                              • Pete32200
                                Senior Member
                                • Jul 2010
                                • 238

                                #45
                                Originally posted by gartman
                                My 1000 mAh 3c 11.1v 25c lipo batt. in my 26" Boat swells up after a run. I'm running a Fiego 7L 3511kv motor with a Caste Creations Hydra 120 esc . I'm new with RC Boats Please
                                He has got to be Messin with everyone on this.....there is no way he could have run that at all !!!
                                VS1 FE - UL-1 - Motley Crew - Miss Geico - Kintec Prince - Rio 51z - 1/16 Summit - 1/10 Summit - Ken Block Rally - Kyle Busch Truck - Losi Mini SCT - BL E-MAXX - Assoc FT SC10 - Wild Willy - Clodbuster - Sand Scorcher......

                                Comment

                                Working...