Turnigy Nano Tech is here!

[cybercrxt]

I was just about to order some 6 cell packs..I think I will now wait a few weeks to see how this pans out! Mike

http://www.hobbycity.com/hobbyking/s...8&ParentCat=85

[crabstick]

[LiPo Power]

holly crap.....

[crabstick]

Just ordered... Hope they are as good as the label

[sailr]

They are just now catching up with the Hyperion G3's that have been out for several months now. Hyperions are more but available and warranteed here in the states.
I give a great discount to the OSE guys.

[Brushless55]

I just saw those Nano packs..
what's the big difference with these new cells?

[egneg]

I just saw those Nano packs..
what's the big difference with these new cells?

I think they changed things a bit but they still list 4S/5000/45C packs for about $76.00.

[crabstick]

I just saw those Nano packs..
what's the big difference with these new cells?

The Burst rating mainly

Previously Turnigy was doing 40-50c cells, I have on order some 45-90c cells and some 35-70c cells.

Hopefully this will mean less voltage sag under high load.

[Jesse J]

They are just now catching up with the Hyperion G3's that have been out for several months now. Hyperions are more but available and warranteed here in the states.
I give a great discount to the OSE guys.

I didn't see batteries on your site??

[sailr]

They are not on our site. We will be stocking just the 3S 2100 25C's for use in our mini boats. All other batteries are special order. Just email what you need and we'll take it from there.

[785boats]

Probably need to set the LVC even higher now as they will most likely totally discharge their capacity before hitting 3.2-3.4 Volts. Gonna take some testing to still leave the recommended 20% capacity in the packs. That's if you drive by the LVC.
Cheers.
Paul.

[sailr]

Huh? Where did you get that logic? They hold their capacity even longer. Why do you think they would discharge more quickly and why would you think you need to set the LVC higher? That doesn't compute.

[Rumdog]

I think he's saying that the voltage won't lag as much under load, meaning that they may run longer before hitting the LVC. The only time I've had an issue with that happening is if the motor is pulling more amps than the packs can supply. Which def. shouldn't happen with packs rated like these, unless you're severely overpropped.

[sailr]

Maybe I read it wrong. I thought he was saying the voltage was going to drop quicker. Still not sure why you would set the LVC that high.

[Brushless55]

Maybe I read it wrong. I thought he was saying the voltage was going to drop quicker. Still not sure why you would set the LVC that high.

that's how it reads to me to..