Same 30"cat, limited experience

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • CornelP
    Senior Member
    • May 2009
    • 745

    #61
    The short part will have the rudder blade attached... the long one is connected to the transom.

    Comment

    • norbique
      Senior Member
      • May 2009
      • 356

      #62
      OK! I got it, he he
      Sometimes I wonder whether the world is being run by smart people who are putting us on or by imbeciles who really mean it.
      - Mark Twain

      Comment

      • CornelP
        Senior Member
        • May 2009
        • 745

        #63
        New hardware is a lot more stable, it was easier to keep it straight, so more time to accelerate on this small pond. I did a nice flight ('bout 10m in lenght), but everything was ok...
        See the pics, I just love the way it sits on the water... next week: bigger pond.
        Attached Files

        Comment

        • Karfrik
          Fast Electric Addict!
          • Jun 2009
          • 1177

          #64
          Where`s the hatch/canopy? at the bottom of the pond?......running nice!!!......Albert

          Comment

          • CornelP
            Senior Member
            • May 2009
            • 745

            #65
            For the test runs I just got an ABS flat cover, easier to remove/check temperatures... next week will do some runs with correct canopy, wings and all. I might go on a bigger pond, where I can keep full throttle for more than 2 seconds...

            Comment

            • CornelP
              Senior Member
              • May 2009
              • 745

              #66
              Guys, HELP!
              Something wrong with the setup... when I increase throttle, it begins wandering left or right like crazy and stabilizes only after a couple of seconds... The rudder is solid, no real play there, just maybe the stainless rudder a bit flexible. What is a good width for a rudder? It is now about 1 inch and it somehow feels too big... maybe it is flexing. Anybody had this issue before??????

              Comment

              Working...