dual rudders

[launchpad]

Hello guys;
I have a dual rudder setup from WHH and I would like to put it on my rio51. I need to get some kind of brackets that will bolt on to this rudder system.They would have to be at list 2 1/2" long so that I can extend the rudder farther out..Anyone here know of where I could get something this.
Thanks
Al

[kookie_guy]

if you can tell me EXCATLY what you need (a sketch would be great) I can make em for you at work, as long as I can find material. No charge, just cover all my shipping/fees/costs. But you gotta be as specific as possible. Especially on holes. Unless you want just the brackets, and drill all holes yourself.

[kookie_guy]

I'm assuming you are going to be drilling the hull on the new boat, not mounting it to anything existing. In that case, I can do the holes no problem, just use the brackets as templates for drilling. Just let me know what size screws you want to use and I will do that. Here's what I got. 0.125" thickness, 3" long, 1" wide strip, with a 1" angled piece. This I can make no problem, with the 2 holes of your choice for mounting.

The only thing I would need from you is the size of the screw attaching the rudder (so I can make a clearance hole for you), the center to center location of the holes, and how far to offset the holes from the edge. Let me make a drawing of what I need.

[kookie_guy]

here is what I need from you.....