Pictures of Finished Rico Mono

[knpc]

I just finished building this and thought I would post a few pics.
29'' rico mono
feigao 9xl
etti 150
4s2p
speedmaster hardware
I hope to take it out for the first run this weekend
Kevin

[tth]

Make sure to get some good video's. These hulls are sweet!

[Doug Smock]

It looks good Kevin!!

Keep the wet side down

Doug

[knpc]

Thanks I'll try to get a video in the next week or so
A couple more pics

[BassBoat88]

Does this hull come with that motor mount installed?

[knpc]

It doesn't come with the motor mount installed. He will put CF on the floor or rails if you want. I installed my own CF. Its a very well handling hull, couldn't be happier.

[Flying Scotsman]

Very nice build. It looks like it may be faster than a Delta Force 29.5, it would be fun to compare the 2 on mirror setups, for speed and handling with the same driver

Douggie

[knpc]

Thanks. I did run it this past weekend with a df29 in the water also. He only has a sv power setup in his so he couldn't keep up. I did prop down and did a few laps with him running 35-40 mph. Its close as far as handling, but the rico may have a slight edge especialy in rougher conditions. I've had the rico to 47 mph and its rock solid at that speed. I may have to take the 1515 1y out of my df33 and put it in the rico to see how it handles in the mid 50s.

Kevin

[Norman2]

Hi Kevin, Who sells this 29" Hull, I think this will be a good replacement for my Titan 29.
Thanks
Norman2

[line6]

http://www.ricoracing.com/electricmono.html

[mike martin]

looks good Kevin if you put the 1515 1y in it you may need to put the trim tabs a little wider to let the hull settle in the water a little more . i have set a few of the 29s with the 1515 1y they handle it very well you'll be suprized.

[knpc]

ricoracing.com His name is Richie, send him an e-mail. I had a titan 29, in my opinion the rico is capable of higher speeds and handles chop better. There is one for sale in the swap shop also.