Cat designs for scratch builders

[rawsonreyes]

who owns the copyrights for this info

great tips i now feel like i can design and build any cat project but with limited time 4 kids it takes forever to complete one build,i have finish a 30 shockerman design/lomdel tweek just going through all the forums reports on esc's and will complete my project.but keep up the good work guys this very pro , and useful to lots of new builders and pros as well. hope to see some things on these escs hi model/turnigy/mystery and other lo end china made stuff,rreyes

[rawsonreyes]

where are the designers/builders

hi guys it's 2012 show what you came up with, plans plugs molds let see it man, is scratch building died?hope not.rr

[norbique]

I recently finished my scratch built cat, 1.1m long balsa/ply construction. Speed 104mk/h (GPS).

And about to start another build very soon.
This time the choice is c5000 Mystic type hull. Size about 44 inches.
I'm currently looking for some good source for 3mm aircraft quality ply.

[rawsonreyes]

can you send me these plans

hi norbique i would like to get these plans if it's no problem,i was out of the forum for sometime but iam back and ready to start some scratch building hope you can help me. this is the fun in rc fe boats.my email rawsonreyes@yahoo.com, you can send pdf/laser cut format all will be appricated.thanking you in advance.rr.

[norbique]

hi norbique i would like to get these plans if it's no problem,i was out of the forum for sometime but iam back and ready to start some scratch building hope you can help me. this is the fun in rc fe boats.my email rawsonreyes@yahoo.com, you can send pdf/laser cut format all will be appricated.thanking you in advance.rr.

Email sent! Enjoy! Norbert

[Prop-a-Gator]

I recently finished my scratch built cat, 1.1m long balsa/ply construction. Speed 104mk/h (GPS).

And about to start another build very soon.
This time the choice is c5000 Mystic type hull. Size about 44 inches.
I'm currently looking for some good source for 3mm aircraft quality ply.

Hi norbique,
Do you have a build thread posted for this cat or plan to post one for the upcoming Mystic? I'm not a builder, but I enjoy seeing the craftsmanship that goes into them. Thanks.

[norbique]

The build thread is on RCU, don't know if it's allowed to link it in here, (so moderators feel free to remove the link if it's forbidden) but here it is:
Norbert's 1.1m balsa cat build

My next build will be posted here on OSE. I like this forum very much.
I'm gathering the raw materials to begin building... so very soon :)