Phil Thomas SS 21

[Jimmy Sterling]

Oh My Who is this ?

http://www.youtube.com/watch?v=kfnkoxNtL84

P.S Now everyone knows why we call him "Bones"

[J.Cullen]

Oh My Who is this ?

http://www.youtube.com/watch?v=kfnkoxNtL84

P.S Now everyone knows why we call him "Bones"

Ahhhhhhhhhhhhhhhhh noooooooooooo

but you cant see my arms
so I dont look incredibly lanky

[nate]

So any pics being put up of this boat, i cant find one being built anywere.. also I cant find were to get on besides fine design rc..any other places???

[Jimmy Sterling]

Hi Nate,

Have not made any recent progress with the boat due to school, the holidays are not too far away though so I sure will be gettin' into it pretty soon.

The last picture posted is what it looks like now

I actually purchased my hull directly from Phil Thomas at Rc Marine Design

Jimmy

[nate]

Thanks Jimmy, whats the price might I ask, Iv seen it at $245.00 i believe.

[Heath M]

Ahhhhhhhhhhhhhhhhh noooooooooooo

but you cant see my arms
so I dont look incredibly lanky

You need some help dude

[nate]

Hey guys I ordered my SSPT21 Today! I bought it from Fine Design.com,
it should be in within 2-4weeks. Here's the color Iv already picked out...
Its called ALSA SPRAY KILLER CAN BASECOAT PEARL TOXIC GREEN PAINT.

[Jimmy Sterling]

ALSA SPRAY KILLER CAN BASECOAT PEARL TOXIC GREEN PAINT.

Love it

[nate]

Thanks man, What setup are you using Jimmy, we need pics!!!
Here's a cut out I made of the Turn fin Im cutting tommorow, well its on a UL-1
Bracket...but ill use something stronger ...
this is the design..

[nate]

Im thinking of using a Neu 1527 1.5D and hydr180hv on 6s -x447...LOL
WOW that would be funny wathing it take flight on throttle tap! lol

[nate]

Here's the turn fin Cut-out, still needs polish ect.
Also the paint looks sweet...


It will look better with clear coat.

[J.Cullen]

You need some help dude

Hahaha

Thanks Heath
Psychologists touch.

[Heath M]

Hahaha

Thanks Heath
Psychologists touch.

I'm here as a mentor dude :)

[z400]

Decatur Illinois?

Really?



I had no idea..
Im about 45 minutes away from Decatur.

[nate]

Ok So alot has been coming in latley. Iv order a Speedmaster.21Strut/ and Mini Hydro Rudder,
.187-3/16 shaft flex, Octura Coupler.187/ 8mm shaft for Neu motor, 9/32" brass tubing which
was way to short..it comes 12in as we all know and Iv decided for the PTSS21 Ill need atleast 1/1/2ft length..so I re-ordered from Amozon for a 36in length tubing.

Then I bought some Carbon fiber sheets for the inside of the hull kinnda what Raydee did on his SS45..It looks clean and gives the hull that extra strenght its going to need for my Killer setup =) You can go to: http://www.dragonplate.com/ they have some good stuff to build with check them out!

So the setup Iv decided to go with is pretty killer for this Hull and probably gunna be a sight to see...

Im using a Neu 1Y 1250Kv on Flight Power EON33 and Im going with 6s2p with a Hydr240hv...I guess ill start with an x450 prop and work on up checking temps as I go.

Any suggestions please let me know.