New build 35inch Delta force 3s Only

[Bmwmick]

Hi Guys
I am new to electric
Building a Delta force 35
I can run any Motor and ESC but Only
3s Battery
What Motor and Prop would you guys recommend I was thinking around
2700 to 3000Kv but open to suggestions

Regards Michael


Sent from my iPhone using Tapatalk

[Bande1]

2500kv prolly be better.

[photohoward1]

2500kv prolly be better.

He said 3s....go with the 3000kv.

[Bande1]

He said 3s....go with the 3000kv.

3s in a boat that size will go about 40mph +/- putting him in prop size of 36mm. 2500kv puts him in the 43mm range.

[Peter A]

Series your 3s batts to 6s, run 1300-1600 kv. If you don't over prop you can easily run an OSE Raider 150 esc. 6s will give you better speed, cooler temps and longer runtime in general.

[Bmwmick]

Series your 3s batts to 6s, run 1300-1600 kv. If you don't over prop you can easily run an OSE Raider 150 esc. 6s will give you better speed, cooler temps and longer runtime in general.

I can only run a maximum of 3s voltage wise
Can run 3s 10800am pack if need be
I wish I could run 4s or even 6s as I have these
I all ready run in other classes
Now have to go out and buy yet more
Batteries [emoji23][emoji23]


Sent from my iPhone using Tapatalk

[Bmwmick]

3s in a boat that size will go about 40mph +/- putting him in prop size of 36mm. 2500kv puts him in the 43mm range.

What size Motor would you recommend
I have 200amp and 300amp ESC I can use


Sent from my iPhone using Tapatalk

[Bmwmick]

I went with a TP4060. 2620kv will try on a 43mm prop


Sent from my iPhone using Tapatalk