Flexshaft question

[MORIDE]

I have revived my Miss G 29 V1, I have it running 60 MPH on 5S, the current stuffing tube is 6 mm and I am running a .150 cable 3/16.

Could I just run a .187 cable 3/16 and pull the teflon liner out with the 6mm stuffing tube?

Any downside to this?

I have never ran anything without the teflon liner, SW2, Mystic and BJ24 V2.

Thanks

[sammyha]

I have revived my Miss G 29 V1, I have it running 60 MPH on 5S, the current stuffing tube is 6 mm and I am running a .150 cable 3/16.

Could I just run a .187 cable 3/16 and pull the teflon liner out with the 6mm stuffing tube?

Any downside to this?

I have never ran anything without the teflon liner, SW2, Mystic and BJ24 V2.

Thanks

I run most of my boats without a teflon liner. Not a problem. Ran a personal best 122mph with my JAE 33FE outrigger, no liner...

Sent from my SM-S916U1 using Tapatalk

[MORIDE]

Thanks but is a 6mm stuffing tube good for a .187 no liner cable?

[sammyha]

Thanks but is a 6mm stuffing tube good for a .187 no liner cable?

If that's the O.D. size sure

Sent from my SM-S916U1 using Tapatalk

[MORIDE]

Yep OD, thanks