New xxx from aeromarine

[BlakeT]

Ok guys I have both motors now, which one should I go with??

[vvviivvv]

What might of been a cool setup - a Lehner outrunner.

[koen]

go for the lehner there is no beter motor

[dasboata]

I sure was, he did this one nice for sure. How is your sprint cat coming along that build was looking nice!

out for paint right now Blake

[BlakeT]

out for paint right now Blake

Put me in line for if you ever want to sell it! Haha

[BlakeT]

Lehner 3080 is going to be motto of choice, now to find out what prop I need to order from Chris to make this thing run about 70-75

[meangenesracing]

Ok guys I have both motors now, which one should I go with??

Go with the T P and give me the lehner lol

[BlakeT]

Go with the T P and give me the lehner lol

Right! Lol i forgot I had another xxx on the shelf and thought I would try the tp in that one to go for 80 and put the 3080 in this one as a real nice setup boat but still shoot for 70s

[BlakeT]

Some progress was made. I messed up and drilled the hole for the steering arm on the wrong side but luckily speedmaster makes a dual arm steering horn which will remedy this.

[dasboata]

Put me in line for if you ever want to sell it! Haha

I have a 1990 Aeromarine cat that am restoring now , I can build for you if your not in a rush !~

[mappo]

Building a new xxx hull (even got the mini version) Troy did a great job running full length carbon. I have purchased everything for the boat so far other than an esc and motor. Going to start rigging it soon. I?m not sure whether I want to use a tp5680 800kv on 12s or my lmt 3080/7 on 10s. The lehner may not suit me as I am looking for 80mph and I?m a little scared to burn up that expensive motor.

Hi, where can I get one of those carbon hull to buy xxx?

[BlakeT]

Hi, where can I get one of those carbon hull to buy xxx?

I got it from Aeromarine Laminates, you can look them up on Facebook.

[BlakeT]

Little progress made, motor is now mounted with the ends soldered as well as the coupler mounted. Next up is stuffing tube and cable

[BlakeT]

Mounted some carbon plate and started fitting the servo

[TRUCKPULL]

Some progress was made. I messed up and drilled the hole for the steering arm on the wrong side but luckily speedmaster makes a dual arm steering horn which will remedy this.

That is the side it should be on for racing.
When you push on the steering rod it flexes, it can not flex when you pull on it.

Blake I have a couple of new in boxes 12S -ESC's in the for sale forums.

Larry