Df 53 Annihilator setup Q's

[Rich]

Hi, I was wonder if anyone can tell me a setup that will push the df 53 to 60mph? I need the works motor, ESC, Drive, prop etc. Any info be much appreciated. I'm just trying to get an idea of how much it would cost.

Thanks,
Rich

[Peter A]

56mm can motor 500-650kv motor, 300A esc, 10s (2P?), 1/4" drive, 65-67mm props. I would recommend building with a flood tube and strut instead of stinger to dial in the hull better.

[Rich]

Any recommendations on a servo and rudder? Also how to you drill the holes for the rail motor mount?

[photohoward1]

Why are you calling it a Q?
Are you racing it in that class?


Sent from my iPhone using Tapatalk

[Rich]

Sorry the Q stands for questions.

[Rich]

Is there nobody that can tell me how to drill the holes in the rails?

[bogieboy]

the easiest way to drill holes in rails in the boat is with a short bit set, and a right angle drill head.

[Rich]

Thanks bogieboy! I thought that might be the best way. Anybody else got any info on rudder, servo and struts for this boat?

[jaike5]

I use a 1/4 scale servo, and a welding rod for a push rod to the rudder. Delta force sniper, 44”
Cheers, Jay.

[Rich]

Sounds good, I was thinking about a tp 5670 600kv on 10s2p with a ztw 300 amp esc. I have heard that this esc motor combo has had problems, any thoughts?

[jaike5]

lehner 3080/7T, sch 40160.

[Rich]

That's an expensive motor! What is the sch40160? I cant find it on the net

[jaike5]

shultz 40/160 or the 300 IMO are the best esc's. unfortunately that company shut down years ago. they sell for 7-800 U.S. dollars. They are deal when you can get one when they come up for sale every now and then . MGM is 1200.00 which is the closest you can get to sch. and they rarely work, have to bring a lap top to the pond to reprogram...... B.S. Sch.... plug and play.
Big boats are pricy 2-3K plus. You get what you pay for or less! Don't cheap out or you will be frustrated and end up paying way more in the long run.
J.

[Rich]

Thanks for the tips. I think this boat is going to be out my price range for what it does. Not sure I'm going to build this one. Thanks for the help guys!

[bogieboy]

in all honesty, this size boat would be cheaper to build as a gas engined boat.... stock zenoah 260pum would be about $200, add another $100 or so for a tuned pipe setup, then 1/4" drive line and a fuel container (most racers run IV bags)

i speak form experience, as i got an old Dumas DV60 for cheap, looked into powering it, and the outlay for motor, esc and batteries was astronomical.... i built it up first with a weedwacker motor, then had an opportunity to trade some chainsaw parts for an older (new in box) Hanson pro ported G230pum, got a pipe for it, and its a blast, not entirely tuned in just yet, but time has been slim to tune... rides good, but need to play with pipe length yet.... i think i am into the entire build for under $500...