6s Rico 31"

[sampit]

Can any recomend a set up for a Rico 31' mono
Would like to use my TP4050 1450kv motor
I'm thinking 6s may be 7s but I'm not sure what size prop would work and my ESC is only 120A but I think on 6s it would be ok but any help aprecated.

[Fluid]

That’s a pretty big motor for a 31” mono. The ESC is pretty small for it, but prop management can help. Start small, with an x445, that should get you into the 50s with the right battery and trim. Depending on the ESC you may not be able to exceed 6S.


.

[sampit]

Thanks Fluid
Yes my ESC is 2s to 8s capable.
So can go 7 or 8s but will that be to much RPM
Would I be right saying that it would pull around 80A on the 6s setup using the X445