Tweet
One of the final pieces to the puzzle done!
The seat was designed in Fusion 360 and 3d printed giving me a piece to make a mold from...only after much sanding and smoothing. A silicone mold was cast and I got 2 seats and 2 seat bottoms. I get all the mold making materials from a site called "brickintheyard.com" They are not cheap but they have good stuff....
The last thing to do is make side vents...I have the ones from the Dumas Scarab from the 80's but I think they look like crap.20191105_180605.jpg20191105_180852.jpg20191105_155059.jpg20191105_180622.jpg20191105_180646.jpg
The seat was designed in Fusion 360 and 3d printed giving me a piece to make a mold from...only after much sanding and smoothing. A silicone mold was cast and I got 2 seats and 2 seat bottoms. I get all the mold making materials from a site called "brickintheyard.com" They are not cheap but they have good stuff....
The last thing to do is make side vents...I have the ones from the Dumas Scarab from the 80's but I think they look like crap.20191105_180605.jpg20191105_180852.jpg20191105_155059.jpg20191105_180622.jpg20191105_180646.jpg
Comment