Tweet
testKIMG0482.jpg
-
Last edited by Firechief51; 10-04-2019, 08:47 PM. -
-
Man she looks good.Comment
-
-
Looks great.
What motor did you end up getting there?See the danger. THEN DO IT ANYWAY!!!
http://forums.offshoreelectrics.com/...hp?albumid=319
http://forums.offshoreelectrics.com/...hp?albumid=320Comment
-
IMG_2239.jpgIMG_2240.jpgIMG_2236.jpg
700-98-840 kv 200 A ESC 8S. I also made a would saddle for the epoxy mount. My friend finally sent me the parts. However I'm short the batteries and the servos so I still have some more work to do. I'd like to test it before and bring it to him for Christmas. And not known to you. I've also cloned this boat. I've traced all the parts and fill the second boat but this one I'm going to run nitro. This one will be the 1984 Atlas Van line I've already ordered the graphics from thunder graphic I've got the base coat a white on the other ship but it's going to be a little tougher to paint, so I'm waiting on the graphics to do the layout stripes there's three color blues.Comment
-
Cool.See the danger. THEN DO IT ANYWAY!!!
http://forums.offshoreelectrics.com/...hp?albumid=319
http://forums.offshoreelectrics.com/...hp?albumid=320Comment
-
Beautiful!! It's amazing what a good wet sand and wheel job can do for paint!!Comment
-
-
IMG_2270.jpg Well I couldn't help myself. So using all the trees. If you will or the cutouts from the Dumas kit, I cloned my own. In another words I completely scratch built it. I got my decals from thunderbolt while back I just haven't got around to painting the ship by the was waiting for the decals the layout the paint. I know it's far from perfect but that's okay. Good enough for me. I found an old 60 Marine engine and put it in there. I kinda like nitro. Most of my model airplanes or nitro. I like to smell.Comment
-
IMG_2271.jpg PS the paint is still soaking wet , I sprayed it with a gravity feed. I match the paint at the Home Depot. I used oil-based through some Japan dryers and it in the splash of TerpsComment
-
Well the main part of the boat is too wet to or tacky rather to put any of the in striping on it. Well quarter inch stripe, but I did do it on the Finn and the elevatorIMG_2273.jpgIMG_2272.jpgComment
-
nice scratch build!!!!Comment
-
Comment