How have you set up your Raider 34?

[Jesse J]

Hey guys, the ose raider 34 has been out for a month or so and I was wondering how people have set up their new boats?

I’ll be posting mine soon...

[Jesse J]

The Xtinction Even

She is ready for the confused water to melt...
Going for p mono, flooded stuffing tube (don’t know what strut depth she gonna want), and more red bling. Betting I’ll end up with an octura detongued 452... but will need to do lots of testing.
Gonna put a pair of 4s packs along side the motor mount.

[Fluid]

Real nice build Jesse! But, RCBoatBitz?


.

[Jesse J]

Thanks Jay... it’s the only place I’ve found with red hardware.
Not bad quality, but it takes forever to get here from Australia.
I contacted an anodizing company but they didn’t reply.

[eric113]

Jesse, have you blueprinted it? Just wondering how true the bottoms are?

So many decisions for hull choice for P mono now.

[Steven Vaccaro]

Nice job Jesse!

[Steven Vaccaro]

What motor did you end up with?

[Jesse J]

Eric, I have not worked on the bottom. It has a light hook, so I’ll be working that soon. Probably could be sanded out, but I’ll probably fill with bondo glaze so I don’t raise the transom. I want a white belly anyway so I’m visible if I were to ever have to show it in a race.

Steve, I went with TP 4060 (3Y) 1750 kv, trying to mimic the Neu 1521 1.5d.

[ray schrauwen]

You like turning big props I see. Interesting....

[Jesse J]

Yes - it’s more rooted in liking lower kv motors for lower amp draw and higher torque. This requires a larger prop and then a higher strut.

[ray schrauwen]

Cool. I always learn something new from you. I really thought that was too low of a kv but, you know your stuff.

You must have some thin props.

[Jesse J]

Thanks Ray,
BTW, What’s club galvatron?

[Jesse J]

Dang, took her out today and with a 48mm prop anD on 3300 4s2p, did amazingly!! Here are my own cf turn fins.

Had 2-4” chop and wow wow wow!

[ray schrauwen]

Thanks Ray,
BTW, What’s club galvatron?

Just something I made up. I was one of the few to get a Ray Presnell version of a Motley Crew made in Vietnam.

Will run it as soon as water melts here. Setup for P limited cat.

[Steven Vaccaro]

Dang, took her out today and with a 48mm prop anD on 3300 4s2p, did amazingly!! Here are my own cf turn fins.

Had 2-4” chop and wow wow wow!

Any video?