New Twin Cheetah build

[Tsoltero19]

Well I have one that I’ll sell you.it comes with carbon fiber lipo trays ,carbon fiber esc tray, plastic receiver box,window sticker and a fiberglass hatch that is also brand new that you can use for speed runs. I’m building a carbon / Kevlar zonda I did the inlay myself. It was my first attempt at a inlay. Now I need to get motors and esc’s to finish it up 67F23F15-1D83-4E5C-9F2B-5A72D530B97B.jpg64B232C2-6544-4814-A391-8BC3B1D4DE33.jpg 038309CF-F3D9-4AF7-8997-7F4A71063E96.jpg4C0A0E8B-C09B-46C3-A839-5224EEA7F4F7.jpg

[Tsoltero19]

The cheetah hull is brand new un drille. And all the other parts are also brand new 47C426E3-9F96-4480-BF2A-C4315EEDC176.jpg5D85EDF8-6BE6-4047-8716-1C29C31FE606.jpgD936EA87-D300-4379-8C99-1A36D2B68B8F.jpg

[royalcasa]

978DB187-D73A-4A45-880D-0933A0B5C142.jpg6FBBDC93-3612-417C-8179-E200550A101F.jpg5DFE2D3E-7532-461D-8909-7C3B3BA3E89F.jpgNot a $500 paint but this will do for me, Except for the picture is upside down

[Brothers 1718]

Transom reinforced with two layers of 1.5mm coremat, hard angles filled with thickend epoxy, all seams under the deck have been reinforced with 4” CF, inlay done. Sponson nose filled with epoxy. Motor mounts,servo
Mount and stuffing tube supports done. [ATTACH=CONFIG]161806[/ATTACH][ATTACH=CONFIG]161807[/ATTACH][ATTACH=CONFIG]161808[/ATTACH][ATTACH=CONFIG]161809[/ATTACH]

Where did you buy the carbon fiber motor mounts from?

[Wally]

Hi guys, I'm new to Electrics... did a little Nitro in the late 1960'd-70s. nIm still trying to work out how to select a Motor, ESC, and Battery Power like what runs on 4s and what runs on 6s ? I like the Spec's on the T.P Power Motors. I got a Cheetah 34" "TWIN" drive, now I need a Motor and ESC, I have ^s batteries already.

I was considering a T.P Power, Alll I want to do is SAW Runs, No CLUB, No Rules just Speed. Any recommendations would be most appreciated... THANKS Also, who is Andy Brown, that does Props?

[royalcasa]

Hi guys, I'm new to Electrics... did a little Nitro in the late 1960'd-70s. nIm still trying to work out how to select a Motor, ESC, and Battery Power like what runs on 4s and what runs on 6s ? I like the Spec's on the T.P Power Motors. I got a Cheetah 34" "TWIN" drive, now I need a Motor and ESC, I have ^s batteries already.

I was considering a T.P Power, Alll I want to do is SAW Runs, No CLUB, No Rules just Speed. Any recommendations would be most appreciated... THANKS Also, who is Andy Brown, that does Props?

With all due respect I can tell you the Cheetah is not the boat for Saw runs, this hull is for oval course great turning boat.
Andy Brown does good prop work he is located in Florida.