hurricane rebuild

[sewerpit]

finally able to post some pics gutted the hull started painting i want to go brushless, would blackjack motor and esc be better than sv 27 motor and esc ? what hardware should i use rudder turn fin any suggestions would be great

[j.m.]

If you are wanting to go with a single motor, it will have to be a LOT bigger than that.

Try this for hardware:
http://www.offshoreelectrics.com/pro...prod=sol-hydro

What kind of speeds are you expecting?

The first thin gI would suggst doing it cutting out the ABS inner hull (if there if one) and coating the inside and transom with glass.

[sewerpit]

rescue status

the rebuild status of the hurricane is on hold, since i already have an sv27 and am in the process of building an mm hull, i will need a rescue vessal and this will be it. new paint and same running system should work fine, you can always push your baots to another level when you know if it flips or blows over you can go get it and bring it back



hopefull these two wont need many rescues

[sewerpit]

rescue ready for trial

paint done, have some pics of attachment i plan to use as rescue device any suggestions welcome



[I
MG]http://i476.photobucket.com/albums/rr127/sewerpit/pics065.jpg[/IMG]

[j.m.]

Umm....

You might want to edit that one.

[sewerpit]

edit what ?

[j.m.]

Pics don't show.

[sewerpit]

sorry you cant see them but they are there

[Eodman]

can't see em on my puter either! Says "this image or video has been moved or deleted" Photo bucket

[Spot Me 2]

Pics don't work!!!!

[sewerpit]

how bout now

[sewerpit]

http://s476.photobucket.com/albums/r...werpit/rescue/ hope this works