Tweet
This is a aeromarine Vector build full C/F bottom , I'd like to run 8s on this 5660/1636 I'm also thinking of adapting the 43" Challenger hatch for a offshore look looking for opinions on the use of 8s also the look of the hatch I'm thinking of starting with a 1814/15/60/3 opinions welcome thanks Chris
-
Last edited by dasboata; 02-14-2018, 10:02 PM. -
more picsLast edited by dasboata; 02-14-2018, 08:25 PM. -
1650 KV? Might be too much for 8s. Better for 6s.Comment
-
TFL Zonda (124mph), Miss Geico Zelos 36 (108mph), Veles 29 (91mph), Zelos Twin 36 (90mph), Miss Geico 29v3 (83.5mph), Sonicwake 36 V2 (83mph), Blackjack 42 (81mph), TFL Pursuit (79mph), UL-19 (75mph), Sonicwake 36 (73mph), Motley Crew (47.5mph), AquaCraft Rescue 17Comment
-
TFL Zonda (124mph), Miss Geico Zelos 36 (108mph), Veles 29 (91mph), Zelos Twin 36 (90mph), Miss Geico 29v3 (83.5mph), Sonicwake 36 V2 (83mph), Blackjack 42 (81mph), TFL Pursuit (79mph), UL-19 (75mph), Sonicwake 36 (73mph), Motley Crew (47.5mph), AquaCraft Rescue 17Comment
-
That’s really not an appropriate motor even for 6S in such a large, heavy boat; to keep amp draw reasonable a too-small prop would be required. Even most Q Sport Hydro racers prefer a lower Kv. For 8S a Kv between 800 and 1000 makes a lot more sense. The Castle 2028 does very well on 8S in big monos.
.ERROR 403 - This is not the page you are looking for
Comment
-
AM Vector with CFF bottom
Hi dasboata,
I'm running the original fiberglass hull Vector from AM. My setup has been so far a TP5840s/1400kV on 8s with ABC 22-/2315-17-45(2) CLL. My max. speed was just over 80 mph, only for SAW use, but killed several esc. due to the high amp draw. For the Munich SAW 2017 I changed the setup to 10-12s with a SSS5680/1000kV motor with less amp's!
Unfortunately the hull(deck) got some cracks when flowing off at high speed and so I'm very interested in a more rugged hull like you have.
My question is, is it possible to order this hull with a C/F bottom(+deck) from AM or any other person who is doing this at its own?
ArnoldComment
-
They are great boat Arnold I can have one built for you !Last edited by dasboata; 02-15-2018, 07:35 PM.Comment
-
I sent you a pm.Comment
-
Comment