Tomahawk 32 RIB Build Twin Outboards

[Crusader]

Hi all, first post on here.

No stranger to boats and boat modifying!

Living on the West coast of Scotland ribs are the definitely required when the *!***!***!***!** goes down

Here's my full scale

8a0f15fede773cde8082ba3e550e343f.jpg

And here's a couple of RC ribs I made around 5 years ago

IMG_1420.jpgIMG_1532.jpgb8a418eb9fa103be23e5b2b662d94760.jpg

The Yellow one is a brushless outboard converted kyosho viper and the red is a Rib converted Ripmax Interceptor 650.

Anyway Its been a while so I decided a needed a new project...

[Crusader]

I started off by browsing for something suitable. I prefer a Mono, and the coastline here prefers a Deep V since its only 200ft away from my front door and I found this on ebay

s-l1600ee.jpg

Its a Tomahawk 32. A fraction bigger than what I've had before but fibreglass over plastic.

I've opted for the CNC outboards and I'm planning to run 4s

My target is 45mph, which is gonna be a huge ask of these little outboards, but I gotta have a target

IMG_2633.jpg

2x Outboards with 2630KV motors
2x 50A ESCs
Single 5000 mAH battery 4s
4 channel radio
Lighting system

Plan is to make a Self righting canopy or A frame for rough days, and a smooth speed version for that target.

[Old School]

Be careful opening up the image in the posting above as I clicked on it and as well as the image a link to an Asian women dating site opened up as well in the background. Very odd!!!!!!

[Crusader]

Be careful opening up the image in the posting above as I clicked on it and as well as the image a link to an Asian women dating site opened up as well in the background. Very odd!!!!!!

You know how many times I've tried to get this link up now