HPR 5009c bulletproof build

[Bradb74]

Ok cool, thanks

[Bradb74]

Just wanted to say thanks to Kent from customcfparts, its been an absolute pleasure dealing with you while ordering all of my parts for my boat.

[fweasel]

I'm expecting a package from Kent soon as well.

[Bp9145]

Here is one I'm building for a customer
[ATTACH=CONFIG]155369[/ATTACH][ATTACH=CONFIG]155370[/ATTACH][ATTACH=CONFIG]155371[/ATTACH][ATTACH=CONFIG]155372[/ATTACH][ATTACH=CONFIG]155373[/ATTACH]

Kent you make some beautiful looking parts there. . .great workmanship.. I'm impressed.

[nata2run]

Thank you guys for the kind words, we’re trying as hard as we can to bring the best parts to the market. Once in a while we like to think we succeed

[srislash]

Thank you guys for the kind words, we’re trying as hard as we can to bring the best parts to the market. Once in a while we like to think we succeed

Oh you are pal, you are!

[Bradb74]

Hi All

Does anyone have any tips on how to make sure the rudder is installed perfectly straight? I started measuring up today to do the install.

[Bradb74]

20171223_161933.jpg20171223_172235.jpg

[Bradb74]

Next on the list is the drives...20171223_183642.jpg

[dmitry100]

I found that to be one of the harder things to do. Actually its a pain in the ass if you've never done it before. I'm assuming using regular drills aren't the way to go... since they make holes not very inaccurate.

[Bradb74]

I'm going to start with a 0.3 mm dremel. Hopefully that'll do the trick.

[fweasel]

These are awesome for getting precision holes started, and cheap too!

2017-12-23 12.01.00.jpg

http://offshoreelectrics.com/proddetail.php?prod=dh-gpmr8130

[Bradb74]

Cool, thanks

[Bradb74]

Making the templates for the drives today....
Thanks to Kent for the pointers.

[Bradb74]

20171231_123101.jpg20171230_151314.jpg