Lady Nelson By Amati

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • CraigP
    Fast Electric Addict!
    • May 2017
    • 1464

    #16
    Beautiful boat! Is that single battery on one side going to give you a weight shift! Maybe in final trim, run a pack on each side...

    Comment

    • RandyatBBY
      Fast Electric Addict!
      • Sep 2007
      • 3915

      #17
      Originally posted by CraigP
      Beautiful boat! Is that single battery on one side going to give you a weight shift! Maybe in final trim, run a pack on each side...
      That was just for testing, it will have in the end deans and a y for 2P. I have to do much clean up of wires and hose too.
      Randy
      For ABS, Fiberglass, Carbon hulls and Stainless hardware
      BBY Racing

      Comment

      • RandyatBBY
        Fast Electric Addict!
        • Sep 2007
        • 3915

        #18
        Little better shot of servo mount.
        Randy
        For ABS, Fiberglass, Carbon hulls and Stainless hardware
        BBY Racing

        Comment

        • Rcsurfrider
          Member
          • Jul 2017
          • 34

          #19
          have you tested the drive in the water yet?

          Comment

          • RandyatBBY
            Fast Electric Addict!
            • Sep 2007
            • 3915

            #20
            Originally posted by Rcsurfrider
            have you tested the drive in the water yet?
            No not yet, too hot and too much work in both of my shops.
            Randy
            For ABS, Fiberglass, Carbon hulls and Stainless hardware
            BBY Racing

            Comment

            • CraigP
              Fast Electric Addict!
              • May 2017
              • 1464

              #21
              You got that heat thing right! Burning up here in Tulsa... I got a Prather SS prop to try, but it's like Mars out there...

              Comment

              • numse
                Junior Member
                • Jan 2017
                • 7

                #22
                Nice build :O)
                The TFL outdrive is beautiful.
                I'm building the same boat, but with 2 TFL outboards. Because of the added weight, I glued a 2 inch kevlar band to the inside of the hull where the molds where glued together. I don't think it's really necessary, but just in case.

                IMG_2284.jpgIMG_2294.jpgIMG_2325.jpg

                Comment

                • RandyatBBY
                  Fast Electric Addict!
                  • Sep 2007
                  • 3915

                  #23
                  I spent 5 hours gluing yesterday so I am getting close to the finish of this project.

                  Hatch in back is all that is left to build and finish.

                  Randy
                  For ABS, Fiberglass, Carbon hulls and Stainless hardware
                  BBY Racing

                  Comment

                  • Beaux
                    Senior Member
                    • Dec 2015
                    • 550

                    #24
                    Cool boat. Love the outdrive.

                    Comment

                    • RandyatBBY
                      Fast Electric Addict!
                      • Sep 2007
                      • 3915

                      #25
                      I built the hatch. fitted it yesterday. still needs to finish coat.
                      Randy
                      For ABS, Fiberglass, Carbon hulls and Stainless hardware
                      BBY Racing

                      Comment

                      • fweasel
                        master of some
                        • Jul 2016
                        • 4282

                        #26
                        Beautiful boat.
                        Vac-U-Tug Jr (13mph)

                        Comment

                        • RandyatBBY
                          Fast Electric Addict!
                          • Sep 2007
                          • 3915

                          #27
                          Originally posted by fweasel
                          Beautiful boat.
                          Just trying to do it justice. thanks

                          I need to find a good clamping system for the windshield. While trying to pull the front seats out the glue on the windshield came loose. I just do not want to end up with a lot of glue build up.
                          Randy
                          For ABS, Fiberglass, Carbon hulls and Stainless hardware
                          BBY Racing

                          Comment

                          • Rcsurfrider
                            Member
                            • Jul 2017
                            • 34

                            #28
                            Update?

                            Comment

                            • Rcsurfrider
                              Member
                              • Jul 2017
                              • 34

                              #29
                              Hey randy! How did it turnout?

                              Comment

                              Working...