head of the river cat hull thread

[ksm2001]

Looking great The carbon fiber really adds a nice look to these hulls.

Ken

[HYDROJERRY]

Good work Alfa, yours cameout better than mine,,O well mine will still do as it should

[netik racing]

update

I have done a few mods on the 32" and it run's well now ...here is a video of it doing 112kph (about 70mph) was running a NEU 1515 on 6s with a seaking 180amp with x440 prop.... esc and motor were cold but caps were warm...

please tell me what your guys think....

http://www.youtube.com/watch?v=UUgSDJnMhZg

the sound and picture are not the best sorry...

[ray schrauwen]

I have done a few mods on the 32" and it run's well now ...here is a video of it doing 112kph (about 70mph) was running a NEU 1515 on 6s with a seaking 180amp with x440 prop.... esc and motor were cold but caps were warm...

please tell me what your guys think....

http://www.youtube.com/watch?v=UUgSDJnMhZg

the sound and picture are not the best sorry...

What wind 1515 ???

I asked before viewing...

[tiqueman]

I have done a few mods on the 32" and it run's well now ...here is a video of it doing 112kph (about 70mph) was running a NEU 1515 on 6s with a seaking 180amp with x440 prop.... esc and motor were cold but caps were warm...

please tell me what your guys think....

http://www.youtube.com/watch?v=UUgSDJnMhZg

the sound and picture are not the best sorry...

Nicely done.

There you go HydroJerry, 70mph on a single motor.

EDIT: Just watched that vid again. May want to look at strengthening that hull (if you havent already) running those kinda speeds. One blow over and you may be buyin a new hull. Just my .02. Other than that, dont change a thing. Shes Rockin!

[netik racing]

2200kv so that's 1y

[netik racing]

Nicely done.

There you go HydroJerry, 70mph on a single motor.

EDIT: Just watched that vid again. May want to look at strengthening that hull (if you havent already) running those kinda speeds. One blow over and you may be buyin a new hull. Just my .02. Other than that, dont change a thing. Shes Rockin!

the hull has been modded and won't break had a few HUGE stack's and its still good to go... cheers Netik

[tiqueman]

the hull has been modded and won't break had a few HUGE stack's and its still good to go... cheers Netik

Well then its perfect!

[netik racing]

Well then its perfect!

FAR from perfect.....

We want to get 125/130 kph (77-80mph) if we find the right prop...but we are not sure what prop to use... we need to do a bit more tuning and get it better...

[Alfa Spirit]

Okay, 2200 RPM is normal for a 4S setup, near 50000 RPM unload with the 6S batteries. the hull isn' t reinforced ,it' s light. Be careful netik ;; Very nice speed

[ray schrauwen]

Nice work did you mod the sponsons??

[ray schrauwen]

My setup to come...

Arc 3655 x2 2800Kv + 200 amp esc x2

2 x 4S 5000 or 2 x 5S 5000's

5S= 18.5V x 2800Kv = 51800 rpm two motors though...

[Jeff Wohlt]

Been looking at those arc motors...look solid to me...kinda look like a neu...eh?

[netik racing]

Okay, 2200 RPM is normal for a 4S setup, near 50000 RPM unload with the 6S batteries. the hull isn' t reinforced ,it' s light. Be careful netik ;; Very nice speed

the hull is reinforced underneath u can't see it from the top.....the NEU motor will swing up to 60 k with no problems i know they normally only run that motor on 4's

im being careful not to smoke myself out.....

[netik racing]

Nice work did you mod the sponsons??

yes been working on them for a long time to get them the way i like....