JAE 21 FE photos

[JohnZ]

Okay, I've got it to this point with paint and clear coat and hardware attached. Now if you see anything out of place let me know. I'm new to these types of boats and have made some mistakes already.IMGP0450.JPGIMGP0451.JPGIMGP0452.JPGIMGP0453.JPGIMGP0455.JPG

[FORT-26]

Looking GOOD!

[785boats]

Yellow & red. One of my favorite combos. And soft blend lines too. Love it.

The only suggestion I will make is to have the water outlet of the cooling jacket be the highest one on the jacket. The inlet on the lowest one.

But one question.
I can't see in the photos, but is there anything on the inside of the boat sealing the pushrod as it passes through the transom?

Cheers.

[JohnZ]

Yellow & red. One of my favorite combos. And soft blend lines too. Love it.

The only suggestion I will make is to have the water outlet of the cooling jacket be the highest one on the jacket. The inlet on the lowest one.

But one question.
I can't see in the photos, but is there anything on the inside of the boat sealing the pushrod as it passes through the transom?

Cheers.

Will do. Never thought of the water inlet/outlet position but I see what you mean. As for the pushrod....yeah, I'm going to seal it.
Thanks for the replies.

[RiggerSpeed]

The only suggestion I will make is to have the water outlet of the cooling jacket be the highest one on the jacket. The inlet on the lowest one.

Agreed. Heat rises.