OSE BlackJack Conversion

[ISR]

I did this and it looks like it will work just fine!

Thanks,

ISR

[Steven Vaccaro]

Several people have asked about the exact parts for this.
So here goes.

.150 cable, either assembled or unassembled. Depending on your ability.
http://www.offshoreelectrics.com/pro...oct-oc150L-24c

Stinger bushing
http://www.offshoreelectrics.com/pro...ros-187sting-b

K&S tubing.
http://www.offshoreelectrics.com/pro...dh-ks-brass-tb

One thing to remember this isnt a drop in system!

[SJFE]

I long for the days of "drop in" upgrades

[Eyekandyboats]

the ammo was a drop in for the SV
the grim prop was a upgrade
batteries are a up grade


I long for it too... :):P

[FE Wannabe]

I am in the process of doing this same conversion on a Proboat Apache that has the same outdrive on it, only I am using a .130 cable with a 3/16" to 1/8" propshaft.
My question is, do you epoxy the Stinger sleeve bearing in the 1/4" brass tubing or do you leave it free spinning?

Question answered in another thread. Stinger sleeve bearing should be left free spinning.