Tweet
I am just finishing up my new Proto Type Oval Master 28 second mold or it could be third or fourth molds. It is a lower vee angle than the previous Oval Master's about 10 degrees less. I call the this one "Frankie" or HSOM-28, I have heard about a few builders joining in the green and this mold is designed to do this. Power is P LTD and up. I have tested the first boat and cannibalized it for the mold to build this set of molds. It will change Vlad the Impaler to a straight shooter.
-
Last edited by RandyatBBY; 06-07-2016, 12:20 PM. -
-
The days work so far. I can not wait to run this. I forgot my radio at the pond, so I have to get it back from the CD at the last race before I can run it.
all three cowls 003.jpgall three cowls 004.jpgLast edited by RandyatBBY; 06-07-2016, 04:24 PM.Comment
-
sweet RandyNEVER SATISFIED RACING
Fine Design 32 V-Hull 4082+6sComment
-
All that is left to do is get new ESC and motor.
all three cowls.jpg
I pulled the Velcro and replaced it I can not get rid of the old picture.Last edited by RandyatBBY; 06-08-2016, 07:24 PM.Comment
-
-
Looks sweet Randy.
BTW: I need to call you the week of the 17th to talk about the flex cable in my O.M 26
cheerioComment
-
The boat ran great to day a little loose but otherwise great. videos being up loaded by Ted Moes as I write this on you tube.Comment
-
I was able to up load my copy.
Comment
-
Comment