ML Boatworks GSX310 FE and Nitro Sport 20 hydro kit Update

[cybercrxt]

Well, this has been a long term build, but I am finally making headway. The one pictured is the nitro center section kit, but a completely different FE center section kit is also designed, and available. The GSX series kits, the 310 and 380 series, both have dedicated center sections for the Nitro, or FE racer, so you have the crossmembers in the proper location, and engine rails in the proper location to mount your batteries, motor, or engine, in the correct location! I am just finishing up the cowling plug for the 310, 31" GSX now. Here are some pics! Mike

[cybercrxt]

All polished up, and ready to make a mold this week! More build pics to come. Check out my website to see the larger GSX380 sport hydro kit to learn more about what makes this boat design special! Thanks, Mike

[Brushless55]

Looks good !

[cybercrxt]

Here is the first cowling out of the molds! Turned out very nice! Mike

[cybercrxt]

I have been working on a couple different things, here is some build info on the GSX310 ride surfaces. Plenty of pics! Mike

Loading the sticks:






Next install the air release and non trip sheeting:






Now the primary ride pad:

[cybercrxt]

And the forward ride pad:

[HOTWATER]

Here's where I am on mine....ready for hardware mockup and West Systems to seal the exterior!! Excellent kit!!




20160424_102538.jpg

[cybercrxt]

I figured I would share what the FE GSX310 layout looks like. This is with a UL-1 motor, and a Hyperion 4s, 5400mah, 35c pack. As you can see, tons of room!

















-

[cybercrxt]

[MrGoFast]

I really what to build one of these boats. Maybe the 33.5 gp version.

[meangenesracing]

I really what to build one of these boats. Maybe the 33.5 gp version.

There's one for sale on here almost done with hardware