Help with new project

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MORIDE
    Senior Member
    • Feb 2008
    • 102

    #1

    Help with new project

    I am looking a new project, Mono V small enough to run good on a single 2 or 3 cell 25 mph+ for kinda of a like my Mini V flex drive on a 3 lipo,(but bounces too much). But a little bigger. would the Delta 26 be something like that? And how does the DF 26 compare to the SV?
  • Avanti
    Fast Electric Addict!
    • Nov 2007
    • 1280

    #2
    the df is way more stable than the sv
    The Manx has been sitting dormant, but I think I finally have my motivation back. I hope to see it float soon.

    Comment

    • kck741
      Senior Member
      • Aug 2007
      • 265

      #3
      I dont know how the DF handles but the SV can get a bit out of hand
      S.S.R.C-Southern Style Radio Control

      Comment

      • mtgoat
        Member
        • Apr 2008
        • 81

        #4
        I'm also very interested in the Delta Force 26. I just ordered one from Steve and expect it to arrive next week. I'm wanting to run 3s on it even though 2s is recommended. I already have four new 3s batteries that were too much for the boat I was trying to use them in. Details are in this thread:

        http://forums.offshoreelectrics.com/...ead.php?t=4672

        Anyone run 3s in the DF26? If it's "way more stable than the sv" , I'm hoping there'll be no problem.

        Comment

        • MORIDE
          Senior Member
          • Feb 2008
          • 102

          #5
          Sounds like you have a similar goal. What hardware/motor/esc are you going to use, keep us posted.

          Comment

          • mtgoat
            Member
            • Apr 2008
            • 81

            #6
            Here's what I have:

            Feigao 540 16S 2218kV motor
            Electrifly SS-45 esc modified for water cooling
            Octura offset rudder system
            trim tabs
            x432, x435 props

            Suggestions would be appreciated. I'll post pics.

            Comment

            Working...