Tweet
The 120 will work fine with a 9xl a xpower will work also. Not to slam castle but they seem to be having issues now with their firmware. It might pay to wait this issue out????
-
Twin cat 9xl,... 29 titan 8xl,....37 in mono kb48 8xl.... 42 in twin elc cat project... 42 in gasser cat 260 modded zenoh''' planes and trucks.... -
well i got about half of the ribs cut out and i will be gone all weekendSUPERVEE 27
37'' TWIN CATComment
-
Are those real vents or just fake ones? Cool boat looks like it will run good
real stream line and you ready HYDRODYNAMIC. Well that was my big word
for the day.
keep us updated on the build.
Last edited by Ocean Racer; 08-22-2008, 12:35 AM.Failure is the First step to SUCCESS
Comment
-
i dont know if they are real or not.but i am not putting them on,just more places to let water in and i dont want that
and the lake i go to has big waves
and im going to ride them
SUPERVEE 27 37'' TWIN CATComment
-
nice looking boat. i wouldnt mind lasering my self that hull... plans?Comment
-
so im back hear are some pics of some pecies drying
SUPERVEE 27 37'' TWIN CATComment
-
UPDATE
I GLUED THE 2 HAFES TOGETHER AND HEAR ARE SOME PICS!!!!!!!!!
SUPERVEE 27 37'' TWIN CATComment
-
ANOTHER UPDATE AND THE PICS!!!
SUPERVEE 27 37'' TWIN CATComment
-
am i doing it right so farSUPERVEE 27 37'' TWIN CATComment
-
well i got some skin on my boat ill get pics laterSUPERVEE 27 37'' TWIN CATComment
-
What thickness ply did you make the framework from??? Looks like 1/4 if so you will be way over building and added alot of unneeded weight...1/8 ply would have been appropriate. Ok now... everything looks like it is comeing together nicely... How was it to work from the plans???Twin cat 9xl,... 29 titan 8xl,....37 in mono kb48 8xl.... 42 in twin elc cat project... 42 in gasser cat 260 modded zenoh''' planes and trucks....Comment
-
it was nice to work from plans. i really like this boat. im might scale it down and build another one thankyou for the plans againSUPERVEE 27 37'' TWIN CATComment
-
Looks like you have been doing a good job. This is the only built version hat I know of. I am glad someone is doing the build.. The 1/4 in ply bulkheads are on the extreme size 1/8 would have been plenty strong. And even thinner on smaller builds....Twin cat 9xl,... 29 titan 8xl,....37 in mono kb48 8xl.... 42 in twin elc cat project... 42 in gasser cat 260 modded zenoh''' planes and trucks....Comment
-
here are some pics of my boat so farSUPERVEE 27 37'' TWIN CATComment
-
I sure hope you sealed the inside of that hull before you put the top skin on.....Twin cat 9xl,... 29 titan 8xl,....37 in mono kb48 8xl.... 42 in twin elc cat project... 42 in gasser cat 260 modded zenoh''' planes and trucks....Comment
Comment