Those are impressive. Beautiful work Christian! Your work never ceases to amaze.
Unlimeted Hydroplane CT 10 by cervelo and CT 13 by mudl
Collapse
X
-
-
These guys have a serious boating club! I was able to catch a glimpse of mudl's twin hydro at the beginning of the video. Very interesting setup and the first I've seen but most guys on this side of the pond only run up to 1/8 scale. 1/6 scale is in a different league. Is the twin CT13 faster than the single CT10?
Comment
-
Hi
at the moment the twin is a little bit faster as the single CT10.But it is not so much.With bigger props the CT 10 can also run so fast as the CT 13.But this is not so important.Much more importent is the fun which we have with this boats.
bye
mudlComment
-
I like the special attention to details in all the german projects....congrats for the great performance too.Thanks for sharing
GillGO FAST AND TURN RIGHT !
www.grsboats.com.brComment
-
MODEL BOAT RACER
IMPBA President
District 13 Director 2011- present
IMPBA National Records Director 2009-2019
IMPBA 19887L CD
NAMBA 1169Comment
-
Hello mudl,
I see you use spring wire drives, I plan to switch my CT06 with 6,35mm flex to spring wire.
Where does your couplers come from ? MBP ? I can't find anything that feed my needs on their site at the moment.
MathieuCT06 U14 2013
TP 5650/850, Castle Hydra Ice2 HV 200, 10S2P 5000 40C, X457/3 Andy Brown detongued and cut down to 55mm.Comment
-
Thank you for your quick reply.
Maybe MBP will have some in the future!
By the way, what diameter of spring wire do you use?
MathieuCT06 U14 2013
TP 5650/850, Castle Hydra Ice2 HV 200, 10S2P 5000 40C, X457/3 Andy Brown detongued and cut down to 55mm.Comment
-
Hi
here is a new CT 13 Video from the Powerboat Meeting Heilbronn 2015
regards
mudlComment
-
Comment