This is my first build. King Of Shaves.
Motors; Leopard 2860 2550kv 4D
ESC 120 Seaking
.062 Wire Drive
440 CNC props
OSE Rudder
SPC 4s 5000 Lipos I removed the hard case and shrink raped them. Thanks KFX for showing me how to do that.
My first run was with the 2550 leopards, 120 esc stock 36mm props, and 3s 5000mah 50c. my best run was 35.7mph.
I then run the KOS with the SPC 4s my speed jumped to 47.3 mph. temps = motors 96, esc 101, bats 85, connectors 106.venom batts 009.jpg
Then I put the 440 props and run 55.7 mph temps= motors 98, esc 106, bat 88, connectors 111. venom batts 012.jpg
Next I did some work on the cnc props and she run 58.7 miles temps did not change. venom batts 005.jpg
Motors; Leopard 2860 2550kv 4D
ESC 120 Seaking
.062 Wire Drive
440 CNC props
OSE Rudder
SPC 4s 5000 Lipos I removed the hard case and shrink raped them. Thanks KFX for showing me how to do that.
My first run was with the 2550 leopards, 120 esc stock 36mm props, and 3s 5000mah 50c. my best run was 35.7mph.
I then run the KOS with the SPC 4s my speed jumped to 47.3 mph. temps = motors 96, esc 101, bats 85, connectors 106.venom batts 009.jpg
Then I put the 440 props and run 55.7 mph temps= motors 98, esc 106, bat 88, connectors 111. venom batts 012.jpg
Next I did some work on the cnc props and she run 58.7 miles temps did not change. venom batts 005.jpg
Comment