Swifter Semi-Scale

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • RayR
    @SiestaKey.calm
    • Jun 2007
    • 1518

    #1

    Swifter Semi-Scale

    I was browsing the net last month when I stumbled upon the Swifter hydroplane from R2 Hobbies. Why, I thought, has no one noticed this little 26” semi scale? After some research, it turns out that several guys on RCGroups had noticed. Paul (785boats) has the Poseidon version, and Flying Barry and the Rusty Old Fart built one as well. However; no one had decorated it so that it resembled one of the turbine boats from the 80’s and 90’s.

    When I received the hull from R2 Hobbies I was pleasantly surprised. The glass work is very good and finish on the boat was great with no visible seam lines.

    I can paint, but I don’t really have the facilities to do a proper job of it. So I decided to use this opportunity to learn a little bit about wrap vinyl. If you have ever worked with calendar vinyl ( the standard type of vinyl) you know that it doesn’t conform well to complex curves. Wrap vinyl on the other hand, does a great job. I choose the 7-Eleven theme because it is one of the few boats that has no interior deck design, so you can tape it without worrying about the graphics pulling up.

    With the decoration complete, I’ll move on to the easy part, the hardware install. I’ll keep it simple and make it a P-Ltd boat with an Aquacraft 2080kv motor and speedo.
    Attached Files
  • rearwheelin
    Fast Electric Addict!
    • Oct 2008
    • 1941

    #2
    Very cool little boat ! Why not build it ?
    "Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
    --Albert Einstein

    Comment

    • flraptor07
      Fast Electric Addict!
      • Aug 2013
      • 2451

      #3
      That's pretty cool Ray, it came out real nice. R2 hobbies boats are good quality, some of thier designs aren't the best but quality is good
      Last edited by flraptor07; 08-08-2014, 05:12 PM.

      Comment

      • 785boats
        Wet Track Racing
        • Nov 2008
        • 3169

        #4
        I raced mine in our clubs 'Restricted' class which meant the 1500kv proboat & 45A ESC on 4s spinning an M645 & m447 prop.
        Great fun. I always intended to put some ride plates on it to sharpen up the edges, but never got around to it before I sold it.
        Love the graphics job Ray.
        Last edited by 785boats; 08-08-2014, 06:12 PM.
        See the danger. THEN DO IT ANYWAY!!!
        http://forums.offshoreelectrics.com/...hp?albumid=319
        http://forums.offshoreelectrics.com/...hp?albumid=320

        Comment

        • ron1950
          Fast Electric Addict!
          • Aug 2010
          • 3024

          #5
          ray how does that wrap stuff work anyway? do u heat it as u apply it or what...that boat looks great ... u may have to get into the wrap business...I got a few u can work on lol

          did u get that boat on ebay? just wondering the price etc....there the boat is 41 and change and shipping is 41 and change also.... hope bill gets a vid of it running soon
          Last edited by ron1950; 08-08-2014, 05:34 PM.
          MY RETIREMENT PLAN?????.....POWERBALL
          74 vintage kirby clasic hydro, pursuit mono, mg, 47'' mono, popeye hydro...

          Comment

          • RayR
            @SiestaKey.calm
            • Jun 2007
            • 1518

            #6
            Ron,

            Heat is only used for very tight corners. I used no heat on this install.

            You can see a video of Paul's Swifter @ 2:20 of this video:

            Last edited by RayR; 08-09-2014, 06:37 AM.

            Comment

            • RayR
              @SiestaKey.calm
              • Jun 2007
              • 1518

              #7
              Ready for her first voyage
              Attached Files

              Comment

              • ron1950
                Fast Electric Addict!
                • Aug 2010
                • 3024

                #8
                looks great ray...did u run it at akerman today? water looked calm in bills vids...
                MY RETIREMENT PLAN?????.....POWERBALL
                74 vintage kirby clasic hydro, pursuit mono, mg, 47'' mono, popeye hydro...

                Comment

                • RayR
                  @SiestaKey.calm
                  • Jun 2007
                  • 1518

                  #9
                  WOW! This boat rips!
                  Last edited by RayR; 08-26-2014, 10:38 PM.

                  Comment

                  • 785boats
                    Wet Track Racing
                    • Nov 2008
                    • 3169

                    #10
                    Great little flier aren't they Ray?
                    See the danger. THEN DO IT ANYWAY!!!
                    http://forums.offshoreelectrics.com/...hp?albumid=319
                    http://forums.offshoreelectrics.com/...hp?albumid=320

                    Comment

                    • RayR
                      @SiestaKey.calm
                      • Jun 2007
                      • 1518

                      #11
                      Originally posted by 785boats
                      Great little flier aren't they Ray?
                      Paul,

                      It is much better than I expected. Actually, it is incredibly better than I expected.

                      Comment

                      • flraptor07
                        Fast Electric Addict!
                        • Aug 2013
                        • 2451

                        #12
                        Originally posted by RayR
                        WOW! This boat rips!
                        Did you run it again?

                        Comment

                        Working...