Twisted Sisters Build

[RayR]

Started a build chronicle in my Gallery.

http://gallery.offshoreelectrics.com/thumbnails.php?album=48

Decided to call her Twisted Sisters because of the well chronicled slight twist in the hull as well as powering her with counter rotating twins.

Hull - Head of the River 32" Cat (28" running surface)

Power - Twin 6L Fieago's on 2S2P

More pics to come shortly.




If you click Title + it will put them in order

[highndry]

Nice. We have a cat class that puppy can run in. Keep us posted

[RayR]

Updates in the Gallery.

[Eyekandyboats]

LOL ray!!!!
i am doing the SAME THING!!!
but hacker 6L's instead.
and hydra 120's

[RayR]

Updates in the Gallery

[RayR]

New Pic Added

[hammertime]

damn u beat me to it i wanted to do this when i found that hull on ebay.... where it says appiration is that a sticker and can it be remover... either way i jealous of this build right now

[RayR]

hammertime,

Yes and no on the decal. Yes, it's a decal, no you can't take it off since the entire hull is clearcoated. Guess you could exacto around it and remove it.

Ray

[ED66677]

Ray,
I know the e bay dealer but was wondering if the hull is worth the money? I mean is the quality good?
I was thinking of getting one and use 2 700SC with 4S lipo?

[RayR]

Actually, the quality is good. The mold is not. The sponson botton on the Starboard side is a little twisted. Not a race boat, but for a nice fun pond cat, should be fine.

You will have to work at fittng twin 700SC's in there. It's tight.

Ray

[ED66677]

are you going to use some 540 or 380 6L?

[showstoppercat]

I would like to use (2) 9xl's or 2300kv Ammo's - with (2) Xpower 100a esc -

Question:
What motor mounts & MHZ air scoops have u used???

Also i think I will go with those ETTI stringers found them on AsTec website but I would like to use OSE SV27 Flex cables do you think they will fit???

[RayR]

From the bottom up.

The ETTI Stingers are great, BUT, they are 4mm drive units. They are delivered with flex cables and teflon tubing. As well, 3/16th's props will need to be shimmed. In the U.S . you will have a problem with replacement parts.

The Scoops I used are MHZ #4 small.

Most importantly, what props do you intend to use? There is a BIG difference between a 1800 and 2300 KV motor. I do not believe your 100 amp controllers leave enough room for error.

All the best,

Ray

[ozzie-crawl]

i have the same boat running a single 7xl on 4s goes rather well and iam in the process of doing a twin but the hull i have for that is unpainted. going to run 8l 380s on 3s. were are you going to place your batteries. scott

[showstoppercat]

Rudder needed

Where can i get a rudder with a triangle mounting bracket like the ones recommended for the CT03 04 or HPR06 from swissmodelpowerboats to suit a 32" Cat
anyone please help