37" FCR Daytona twin (first build help needed and appreciated)

[Alex Jones]

I know I haven't posted in a while but aiming for completion by next month. Got shims on the way for the stingers and ordering carbon fiber fabric and the epoxy resin tomorrow for the inlay and the rudder assembly.20150211_191657.jpg

[Alex Jones]

OSE doesn't waste time getting your items shipped! Got my esc's in yesterday and Thursday should be getting more in, all thats left is the batteries. I think...

20150224_120747.jpg

[ls1fst98]

4s on 2000kv is perfectly fine for sport running, I would consider 5 and 6s for saw type runs.

[Alex Jones]

I actually got my hands on a pair of 3674 leo's at 2650kv so 3s would be at 29.4k rpms for sport.

Update:
Got my first layer of glass down and the rest of my hardware.

20150225_193846.jpg

[srislash]

I actually got my hands on a pair of 3674 leo's at 2650kv so 3s would be at 29.4k rpms for sport.

Update:
Got my first layer of glass down and the rest of my hardware.

[ATTACH=CONFIG]128445[/ATTACH]

This is the kv I have on the shelf for mine as well. My thoughts were at keeping a bit of the weight down for this hull.
Glad to see you back on this Alex.

[Alex Jones]

You are definitely right about weight being a factor on this hull not to mention the lack of room getting a battery into the sponson. I tried a spare 3s 5000mah it was a tight squeeze.