Tweet
Hey Everyone,
Well finally finished this big girl
Here's like a before n after build thread
HPR 233 / RADTEKPOWERBOATS 92"
Neu 2230 1y's
Schulze 40.334wk's
Billet hardware from Radtek powerboats ( had some parts annodised black for the look i wanted )
Revolectrix 4x 8800mah 6s packs.
Grypon regulator
High volt Savox servos.
Andy Brown Props
Customcfparts Battery trays with sliders.
Customcfparts ESC lids
Customcfparts Radiobox
Customcfparts Cintron Decal set
Bit of carbon work done by myself, Bulk heads, far front, front, rear, esc box's, engine mounts.
Metallic paint by " Made you Customs " thanks dave..
Think thats about it?
And ALOT of time haha
Firstly i would like to put out a HUGE thank you to RADTEKPOWERBOATS !!!!!!Radek himself has been there for all my questions from the start to finish and believe me, his email account would be clogged.
From asking questions before i purchased the hull, to negotiating freight, hardware , advice on build, his own experiances with this hull etc etc.
I can not thank him enough for being there wellllllllllllllll after the sale. The boat was flawless in build quality, and is great to see such a beautiful big hull originally made by HPR continued by someone that can keep the standards just as high.. so thanks again Radek
http://www.radtekpowerboats.com/
Secondly a BIG shout out to Kent @ http://www.customcfparts.com/I was pretty far into my build when i stumbled accross one of the threads on here showcasing Kents work.
I wish i had found him sooner as cutting out all my carbon engine mounts and esc boxes with a dremmel was painfully slow and dirty!
I immediately had to have this carbon Jewellery as i call it haha
He is a champion guy to deal with and we went to work on some carbon parts for this big girl.
ESC BOX LIDS, RADIO BOX, BATTERY TRAYS.
He also put together my Decals for the CINTRON theme i was going with.
Kent has an eye for detail and a huge imagination of great ideas even if your short of them yourself.
If you want a mean looking boat, make sure you get in contact with him
Lastly to all the others out there that shared there very helpful knowledge/Opinions with me.
ManuelW
Mudl
Racemechanix
Grail
Achim K
Fluid
Punisher 67
I cant thank you enough. Every little detail counts when building a huge boat like this that there isnt much info on.
So without rambling on even more
Heres some pics
Got a few funny looks from people when taking this home from the freight place. Coffin anyone?
IMG_1695.jpgIMG_1696.jpgIMG_1891.jpgIMG_1899.jpgIMG_1907.jpg
Well finally finished this big girl
Here's like a before n after build thread
HPR 233 / RADTEKPOWERBOATS 92"
Neu 2230 1y's
Schulze 40.334wk's
Billet hardware from Radtek powerboats ( had some parts annodised black for the look i wanted )
Revolectrix 4x 8800mah 6s packs.
Grypon regulator
High volt Savox servos.
Andy Brown Props
Customcfparts Battery trays with sliders.
Customcfparts ESC lids
Customcfparts Radiobox
Customcfparts Cintron Decal set
Bit of carbon work done by myself, Bulk heads, far front, front, rear, esc box's, engine mounts.
Metallic paint by " Made you Customs " thanks dave..
Think thats about it?
And ALOT of time haha
Firstly i would like to put out a HUGE thank you to RADTEKPOWERBOATS !!!!!!Radek himself has been there for all my questions from the start to finish and believe me, his email account would be clogged.
From asking questions before i purchased the hull, to negotiating freight, hardware , advice on build, his own experiances with this hull etc etc.
I can not thank him enough for being there wellllllllllllllll after the sale. The boat was flawless in build quality, and is great to see such a beautiful big hull originally made by HPR continued by someone that can keep the standards just as high.. so thanks again Radek
http://www.radtekpowerboats.com/Secondly a BIG shout out to Kent @ http://www.customcfparts.com/I was pretty far into my build when i stumbled accross one of the threads on here showcasing Kents work.
I wish i had found him sooner as cutting out all my carbon engine mounts and esc boxes with a dremmel was painfully slow and dirty!
I immediately had to have this carbon Jewellery as i call it haha
He is a champion guy to deal with and we went to work on some carbon parts for this big girl.
ESC BOX LIDS, RADIO BOX, BATTERY TRAYS.
He also put together my Decals for the CINTRON theme i was going with.
Kent has an eye for detail and a huge imagination of great ideas even if your short of them yourself.
If you want a mean looking boat, make sure you get in contact with him
Lastly to all the others out there that shared there very helpful knowledge/Opinions with me.
ManuelW
Mudl
Racemechanix
Grail
Achim K
Fluid
Punisher 67
I cant thank you enough. Every little detail counts when building a huge boat like this that there isnt much info on.
So without rambling on even more
Heres some pics
Got a few funny looks from people when taking this home from the freight place. Coffin anyone?
IMG_1695.jpgIMG_1696.jpgIMG_1891.jpgIMG_1899.jpgIMG_1907.jpg
Seriously, you should be so proud. Big girls like that are not easy.
Comment