Hpr 115 round 2

[Chrisg81983]

I am doing a second hpr 115 carbon kevlar version. Setup will be lehner 2250/4's 2959kv on 7&8 cell in wye configuration. Esc's being used will be the yge 160hv's with additional cap banks. It will also be built using hpr drives and rudder. Thanks for looking and I hope you enjoy.

[Chrisg81983]

Here are some pics

[Chrisg81983]

For this build I made my own lipo trays and motor mounts using hpr products at a basic template. I will also be doing a cf inlay in hull and hatch for extra strength.

[Chrisg81983]

Some more pics

[bracka69]

Hey buddy it's been a while we haven't chatted. She's looking good my friend.

[Chrisg81983]

Hey joshua how are you ? Thanks for the compliments ......

[bracka69]

Hey man I've been good. I see where HPR has opened back up for business.

[iridebikes247]

You think she'll be ready for tomorrow? lol looks good chris, the inlay is sick its amazing what the epoxy + Keith's fabric did for an already stiff boat.

[srislash]

Hey Chris,just can't stop eh? 2900kv and 7-8s.... man O' man

[MrEvoMan]

Is the only place to get the HPR hulls is from Sweden?

[Chrisg81983]

Shawn it will be a little over 1700 kv in wye on 7 & 8 s and 2959 kv on 4 & 5 s in delta.


@ mrevoman yes the only place to get a real hpr is from hanspeter or manuel unless u buy one second hand from someone.

[Chrisg81983]

Ok I got the drives and rudder mounted for this build I made all my own mounts and lipo system. The hardware was installed the same way I did my other hpr's. Basically using an ink pad to stamp the mounting flanges on to a piece of paper then cut out exact. Next I use 3m super 77 to adhere patterns to hull.

[Mike Caruso]

Wow Chris sweet job! What MPH are you setting it up for? Oval racing? SAW?
Mike

[Chrisg81983]

Hey mike thanks for the kind words. The build is for saw running but will mainly be used for sport running. Speeds around 110-120 mph will be the goal with this boat.

[nata2run]

Hey Chris, as usual very nice and clean build. I always end up saying the same about your work lol. Those are definetely some serious speed goals! I sooooo wish I had the waters over here to even try.