hydraulic steering arms

[ace028]

the cable isnt for batteries, and the board isn't a esc, its the little board infront of the esc, looks like a blinky balancer almost.

[C.Smock]

bone war, how much did that set cost, USD?

[bonewar]

OK c.smock the set is worth $237 swiss francs = $ 232 us dollars delivered, ace208 mate you just put a little grease on the cable. there is no seal on the hydraulic , the arm is a tight fit so i don't think any water will enter . i have no idea what those boards are, i was just using that pic to show the servo with 2 wires attached. bonewar

[j.m.]

Those boards are kinda like these:

http://www.rc-monster.com/proddetail.php?prod=MGMBB03&cat=21

[SteveReesor]

I believe those boards are a LiPo-Dimatic set-up from Schulze...

[Meniscus]

Those boards are kinda like these:

http://www.rc-monster.com/proddetail...MGMBB03&cat=21

Wow, I'm not from the aircraft world so I don't know anything about these, but that is a LOT of data. I think with that much info, I could get myself in trouble!

....who am I kidding, I always get myself in trouble!

[j.m.]

Those were really made for boats and cars, with the exception of pattern type planes.

On any other plane, I wouldn't waste the weight.

Their esc's are also incredible.

[Ocean Racer]

so they are like a date logger?

[j.m.]

Bone, sorry for hijacking this thread.

Yes, that is a data logger. I think you can also add a rpm sensor to it and measure the rpm at something like the flex coupler.