Got this boat from Mark and I am trying to see if we can finally get some water under it! The hull was prepped with carbon inlay and setup by Keith. It was left loose for paint. I have torn it all the way down and built it back up to where I am close to trials. All wiring complete, stingers and rudder sealed and setup. Need to mount batteries and electronic and program/setup. Maybe this weekend. Setup is;
FC Daytona hull with CF inlay by KBB
Custom CF motor mounts by KBB
Custom CF stuffing tube supports by KBB
Custom servo mount by KBB
Custom esc cover by KBB
KBB hatch bolt kit installed
2x Hyperion 3026 1900 kv outrunners
2x 110mm 3/16 stinger drives
2x Aeromarine flex cables,L&R
2x Aeromarine 3/16 collets
2 CR x442 aluminum props
Fightercat 240 Twin esc
Kintec center mounted rudder 110mm
Traxxas radio from that useless peice of *!***!***!***!** Spartan boat.
Running 4s1px2 4000 50c lipo to start.
20130505_172500.jpg
FC Daytona hull with CF inlay by KBB
Custom CF motor mounts by KBB
Custom CF stuffing tube supports by KBB
Custom servo mount by KBB
Custom esc cover by KBB
KBB hatch bolt kit installed
2x Hyperion 3026 1900 kv outrunners
2x 110mm 3/16 stinger drives
2x Aeromarine flex cables,L&R
2x Aeromarine 3/16 collets
2 CR x442 aluminum props
Fightercat 240 Twin esc
Kintec center mounted rudder 110mm
Traxxas radio from that useless peice of *!***!***!***!** Spartan boat.
Running 4s1px2 4000 50c lipo to start.
20130505_172500.jpg
Comment