Delta Force 41" Sports Mono

[millzee]

I've had this hull and most the gear to build it sitting around for too long and finally got around to getting things together.
The df41 hull will have a Neu 1527 1.5d brushless motor, swordfish 300amp speedo and run 6s with a maybe a x646/3 or what ever I decide to screw on.
I began the build by giving the interior of the hull a sand and then laid carbon / Kevlar cloth to cover as much area of the interior as I could reach. With that dry, the next day I installed the hardware, stuffing tube and made a motor mount. I spent today making up a battery tray and a servo holder and now have them installed, I'm at a "stuck point" now as I wait for the speedo to be shipped from Steve. Here's a few pic's.

[millzee]

[millzee]

[millzee]

I finished this boat off this morning and took if for a quick maiden. It ran very stable with a x646/3 prop but it lacked a bit of punch so I've fitted a x548 and will head back over for another run when my missus gets here to watch the office. I'm very happy with it so far.

[Neveryachtz]

I'm new here so this might be a stupid question, but what's the black stuff you used to stick everything to the hull? Thanks.

[millzee]

It's JB wield. http://www.offshoreelectrics.com/pro...p?prod=hd-8276

[SSchevy98]

Do you use a 8x4 mm silicone tubing? Do you put the speed control and the motor in a different water lines?

Good looking boat.

[millzee]

I use the 1/4" water tube purchased here on ose and run separate lines, one to the speedo and one to the motor.

[runzwithsizorz]

Sooo, Millzee ya think maybe you should get some beefier battery tie-downs? LOL Looks like they came from a set of luggage.

[SlickZERO]

I am thinking of building 2 for my friend and I to race. We have several boats and a private lake with buoys to race around. Do you still have it? How does it handle chop, race water, wakes?