It seems lately ever time I have an opportunity to go to the lake there is 30+ winds lol. Answer go bigger!!
Picked this hull up from SJ, what were planning to do is power it with two 800's that are direct coupled. The way I did this was by removing one armature and having a .130 hole bored 1" deep into the motor shaft at the local machine shop. This is my first attempt at this so who knows. Everything is pivoting on if the high temp sleeve retention loctite can hold. So things will be pretty basic to start with. After placing the motors in the boat with batts there is no way to get close to 30% cog, so the back tray support area with the tube needs to come out. Keep in mind this is just a fun play boat that I am HOPING can run with her nitro sisters! at this elevation they run around 34-37mph.
Picked this hull up from SJ, what were planning to do is power it with two 800's that are direct coupled. The way I did this was by removing one armature and having a .130 hole bored 1" deep into the motor shaft at the local machine shop. This is my first attempt at this so who knows. Everything is pivoting on if the high temp sleeve retention loctite can hold. So things will be pretty basic to start with. After placing the motors in the boat with batts there is no way to get close to 30% cog, so the back tray support area with the tube needs to come out. Keep in mind this is just a fun play boat that I am HOPING can run with her nitro sisters! at this elevation they run around 34-37mph.
Comment