BBY MHz 44 mystic

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • RandyatBBY
    Fast Electric Addict!
    • Sep 2007
    • 3915

    #1

    BBY MHz 44 mystic

    I have a start of a build. It is a MHz 44 mystic with all German parts, the paint by Pro Painter and assembly by me. That is right even the hardware. I think the motors will be two 1950 5T I need a little help deciding what the Hi-amp or LK. I think the twin 1950 5T will be a hot setup on 6S. any way on to the boat as I received it.










    Uploaded with ImageShack.us
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing
  • nata2run
    customcfparts.com
    • Nov 2011
    • 1837

    #2
    That is sooo cool, I would go 2240/7 or 2250/5. Definetly go the LK
    Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
    "Follow someone's footsteps and you will always be a step behind"

    Comment

    • RandyatBBY
      Fast Electric Addict!
      • Sep 2007
      • 3915

      #3
      Originally posted by nata2run
      That is sooo cool, I would go 2240/7 or 2250/5. Definetly go the LK
      I like the choice I was thinking a bigger safer motor, I kind of liked the 1950/6 but the client wants a hot setup. That 2250/5 is hot safe power more or less (with a little care on prop choice and good ESC). Also I can have the 8MM shaft I want.
      Randy
      For ABS, Fiberglass, Carbon hulls and Stainless hardware
      BBY Racing

      Comment

      • Vortech C5
        Member
        • Feb 2011
        • 94

        #4
        Got my eye on this one!

        Ray

        Comment

        • silver
          Member
          • Dec 2011
          • 77

          #5
          Very nice amazing work, one oder beautiful Mystic comes alive

          Comment

          • KillerDave
            Senior Member
            • Oct 2009
            • 370

            #6
            F*****g wow!
            HPR C-5009, Riptide48, PaynPak 1/12, Miss Budweiser 1/8 Hydro, Miss Freya (own design 1/8 Hydro), HOR 32, Twin 380 HOR 32, Magin one

            Comment

            • RandyatBBY
              Fast Electric Addict!
              • Sep 2007
              • 3915

              #7
              It is going to get two 2250/5 on 6S should be real fast.
              Randy
              For ABS, Fiberglass, Carbon hulls and Stainless hardware
              BBY Racing

              Comment

              • RaceMechaniX
                Fast Electric Addict!
                • Sep 2007
                • 2828

                #8
                Although they are in a twin the 2250/5 is in SAW territory on 6S. It will be very fast or very quick at cooking esc's. I was seeing 300+ A levels with that motor.

                TG
                Tyler Garrard
                NAMBA 639/IMPBA 20525
                T-Hydro @ 142.94mph former WR

                Comment

                • RandyatBBY
                  Fast Electric Addict!
                  • Sep 2007
                  • 3915

                  #9
                  Originally posted by RaceMechaniX
                  Although they are in a twin the 2250/5 is in SAW territory on 6S. It will be very fast or very quick at cooking esc's. I was seeing 300+ A levels with that motor.

                  TG
                  When you were running the 2250/5 at the SAW's were you running twins?
                  Randy
                  For ABS, Fiberglass, Carbon hulls and Stainless hardware
                  BBY Racing

                  Comment

                  • nata2run
                    customcfparts.com
                    • Nov 2011
                    • 1837

                    #10
                    There is always the option of 8s in wye mode. That should push some speed as well. If the boat is running very well, she should turn some 447's cut down on 6s no prob. Could be a 115-120mph setup. I think I will stick to 8s with 447 props at most. 100mph is fine.
                    Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                    "Follow someone's footsteps and you will always be a step behind"

                    Comment

                    • RandyatBBY
                      Fast Electric Addict!
                      • Sep 2007
                      • 3915

                      #11
                      Ithink this could be a good 4S single motor too, But this is a twin thread.
                      Randy
                      For ABS, Fiberglass, Carbon hulls and Stainless hardware
                      BBY Racing

                      Comment

                      • nata2run
                        customcfparts.com
                        • Nov 2011
                        • 1837

                        #12
                        5s with 447's or even PS 4516/3 could be real nice. If it was mine it would be on the shelf for display. Lol
                        Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                        "Follow someone's footsteps and you will always be a step behind"

                        Comment

                        • RandyatBBY
                          Fast Electric Addict!
                          • Sep 2007
                          • 3915

                          #13
                          If I painted it it would be on the shelf too. Just like my Smokin Joes.
                          Randy
                          For ABS, Fiberglass, Carbon hulls and Stainless hardware
                          BBY Racing

                          Comment

                          • RaceMechaniX
                            Fast Electric Addict!
                            • Sep 2007
                            • 2828

                            #14
                            Originally posted by RandyatBBY
                            When you were running the 2250/5 at the SAW's were you running twins?
                            Nope just a single but I found out that a slightly too large diameter or pitch prop would send the current through the roof. Just have to be very careful with 50,000+ RPM.

                            Did you order the motors with 6 terminals or 3?

                            TG
                            Tyler Garrard
                            NAMBA 639/IMPBA 20525
                            T-Hydro @ 142.94mph former WR

                            Comment

                            • RandyatBBY
                              Fast Electric Addict!
                              • Sep 2007
                              • 3915

                              #15
                              I think we got the three terminals no need for two winds. You still have your motor?
                              Randy
                              For ABS, Fiberglass, Carbon hulls and Stainless hardware
                              BBY Racing

                              Comment

                              Working...