Tweet
Hi,
water intake looks pretty decent. To improve it remove the litte edge at the front when the aluminium part ends. Try to smoothen that and extend the grove a little to the hull (just 2-3mm are enough). There should be no step or edge from the bottom surface of the boat to the inner surface of the water inlet.
regards,
Manuel
water intake looks pretty decent. To improve it remove the litte edge at the front when the aluminium part ends. Try to smoothen that and extend the grove a little to the hull (just 2-3mm are enough). There should be no step or edge from the bottom surface of the boat to the inner surface of the water inlet.
regards,
Manuel
Comment