HPR115 Bulletproof Build

[nata2run]

Hello Folks,
Needed a home for my LMT 2250/5, so I had a chat to Manuel W. and now this thing is in the post!
Hoping for a safe arrival to Australia.

Some highlights for the build will be:
LMT 2250/5
AS25.150 EVOII
Savöx 1251mg
Max 6s for some insane speeds
Lots of custom carbon parts & glitter ......

Also want to take the opportunity to thank Manuel for a super fast turn around.
Wish me luck, I will keep you guys posted!

[srislash]

You gonna try to flip this one then?

[nata2run]

Hopefully lots lol. Gotta make Chris cry alittle hehe. His fault I got this in the first place. Bloody group pressure lol

[srislash]

Hopefully lots lol. Gotta make Chris cry alittle hehe. His fault I got this in the first place. Bloody group pressure lol

I'm missing the Shocker and all it's spills.Man I made that one tuff.Looks like it'll be next year for the upsizing though.

[ManuelW]

Hi Kent,

well will be nice to see a little competition between you and Chris --> will probably bring us some really nice HPR06 builds

And both of you have setups which can achieve the 100mph+, your 2250/5 on 6S probably even figures around 120mph.

Hopefully the parcel arrives well and fast, I think this was the best/fastest solution.

regards,
Manuel

[nata2run]

Yeah man it was nice, you can still get it though.?

[nata2run]

Thanks again Manuel. Ill be happy if my boat runs like chrisses. But I will definetly do what I can to get a nice build. This is my first HPR so really excited about that.

[Chrisg81983]

Yeah man about time u got smart and went hpr lol good luck with it cant wait to see it. She shoukd be amazing if u build her anything like your mhz's.

[nata2run]

.....any day now :) weather here is getting nice and evenings are long. In the mean time I can look forward to the calm lake round the corner.

Lake 1.JPG

[Chrisg81983]

You r gonna love a real boat lol

[RaceMechaniX]

Are you building this as a single or twin?

[nata2run]

Chris, I already have a real boat... Lol
Tyler, twin 2250/5 on 5-6s

[nata2run]

The plan is to make this my nicest build so far. Hope I can get away with the intended holes only LOL. But have lots of bling.....

[srislash]

The plan is to make this my nicest build so far. Hope I can get away with the intended holes only LOL. But have lots of bling.....

I'm sure she will be a beaut' Kent.

[nata2run]

Hello Folks,
No hull as I'm typing this but hoping it will walk through the door :) in the next couple of hours.
I have decided to use a full plate again to mount the servo and hide the ESC’s. I like the idea of added strength/support all the way through the tunnel.
I really like the adjustable stuffing tube mounts I used on the MHZ 138 build so they are used again.
The motor mounts this time are x2 3.5mm (7mm in total) CF plate sandwiched together with a thin anodized aluminium plate to show the HPR Logo.
If everything goes to plan the HPR 115 Logo will illuminate purple when power is applied to the RX.
The boomerang (A native Australian Ikon/Symbol) will be purple anodised aluminium.

HPR115 - Drawing.jpgHPR115 - Carbon.jpg