Titan 33 Questions

[blastoff]

I have two Brushless systems from the AquaCraft SV 27 I was going to put them in my Villian Ex until Logic sunk into my somewhat thick skull !!! And then I decided Why not just build a second boat ??? Maybe a boat with a better hull (that way I wont end up with a polished turd)
Now I am thinking about the Aero Marine Titan 33 I would like to use two Aqua Craft outdrives that I got from a Blackjack 26. Would this be a good hull or is there a better one for dual drives ???
Has any one used these drives in pairs before ??? Any tips on converting from u-joint to flex would be way Kewl !!!
In the future I would like to look into making some outdrives in my machine shop
Thanks in advance for all your input !!!
My last vehicle went Mach 3.1 until it glitched
http://www.rockethigh.com for details

[Fluid]

I'm not certain that the Titan40 is a good hull for twins. It is a pretty deep vee and at speed it runs well out of the water.....I don't think that you could keep both props in the water. Any chine walk and one prop would leave the water - I'm not certain what would happen next.



.

[blastoff]

Any suggestions on a better hull in the 32" to 33" range for twin drives ??? I must use these parts on a hull !!!

[Doug Smock]

I'm drawing a blank. You're talking about twin steerable outdrives right?

Doug

[blastoff]

I'm drawing a blank. You're talking about twin steerable outdrives right?

Yep one of them guys who like twin steerable outdrives

[z400]

why not 2 new boats both with single drive set ups

[Jeepers]

My last vehicle went Mach 3.1 until it glitched
http://www.rockethigh.com for details

Nice rocket, my wife built (her first time) a Giant Leap Talon 3 and launched on a Aerotech I285 she got her NAR level 1 with that. It was set up on a Missle Works altimeter with dual deployment, full carbon fiber laminated body tube from Aero Sleeves.

[blastoff]

Ed (giant leap owner) is a friend of mine He is a very wonderful person to deal with and gives everything he has to the sport !!!

[biggs]

i have one

i have a titan 33 with two supervee motro in it tha hull run fine with twin drives/you can see it onyoutube runing just go to 40mphrcboat an yo will see it

I have two Brushless systems from the AquaCraft SV 27 I was going to put them in my Villian Ex until Logic sunk into my somewhat thick skull !!! And then I decided Why not just build a second boat ??? Maybe a boat with a better hull (that way I wont end up with a polished turd)
Now I am thinking about the Aero Marine Titan 33 I would like to use two Aqua Craft outdrives that I got from a Blackjack 26. Would this be a good hull or is there a better one for dual drives ???
Has any one used these drives in pairs before ??? Any tips on converting from u-joint to flex would be way Kewl !!!
In the future I would like to look into making some outdrives in my machine shop
Thanks in advance for all your input !!!
My last vehicle went Mach 3.1 until it glitched
http://www.rockethigh.com for details

[kahnen]

I have two Brushless systems from the AquaCraft SV 27 I was going to put them in my Villian Ex until Logic sunk into my somewhat thick skull !!! And then I decided Why not just build a second boat ??? Maybe a boat with a better hull (that way I wont end up with a polished turd)
Now I am thinking about the Aero Marine Titan 33 I would like to use two Aqua Craft outdrives that I got from a Blackjack 26. Would this be a good hull or is there a better one for dual drives ???
Has any one used these drives in pairs before ??? Any tips on converting from u-joint to flex would be way Kewl !!!
In the future I would like to look into making some outdrives in my machine shop
Thanks in advance for all your input !!!
My last vehicle went Mach 3.1 until it glitched
http://www.rockethigh.com for details

Well, I think its obvious. Its not like you have to be a rocket scientist to figure it out. sorry couldn't resist.

[blastoff]

biggs can you tell me what kind of set up are you running ???
What kind of drives ???

[biggs]

biggs can you tell me what kind of set up are you running ???
What kind of drives ???

the two drives i am useing or from the suppervee an esc an motor or too/14 cell 4200 amps