Tweet
I am building a ovm 26 but also a scat cat21 being that these are some what simular as far as the steps go so i thought id post it also. I plan on using a pb 1500 motor,an aq 60 esc and octura mini hardware
-
-
for the good stuff now
power plant and hardware -
motor mount
made and installed a motor mount and re matted the motor area and put a piece of mat across the mount , if you know me this is gonna have some serious powerComment
-
installed rudder strut stuffing tube and cut flexComment
-
-
I made it in my garage if you like this one check out the one i made for the ovalmaster 26Comment
-
after my cats knocked down a milk crate full of toolsComment
-
sorry should have previewed those pics the flash was onComment
-
do u have a build thread on the oval master 26, i miss mine i want to build another now that i know a little moreComment
-
filling the stuffing tube hole and then off to be primed in the next hour or soComment
-
sanded primed and ready to paint after a allowing time for the primer to cure completely over nightComment
-
painted ran out of paint for the hatch will paint the hatch tomm and will join then double clear coatComment
Comment